56F8323/56F8123 Data Sheet Preliminary Technical Data 56F8300 16-bit Digital Signal Controllers MC56F8323 Rev. 17 04/2007 freescale.com Document Revision History Version History Description of Change Rev 1.0 Pre-Release version, Alpha customers only Rev 2.0 Initial Public Release Rev 3.0 Corrected typo in Table 10-4, Flash Endurance is 10,000 cycles. Addressed additional grammar issues. Rev 4.0 Added Package Pins to GPIO Table in Section 8. Removed reference to pin group 9 in Table 10-5. Replacing TBD Typical Min with values in Table 10-17. Editing grammar, spelling, consistency of language throughout family. Updated values in Regulator Parameters, Table 10-9, External Clock Operation Timing Requirements Table 10-13, SPI Timing, Table 10-18, ADC Parameters, Table 10-24, and IO Loading Coefficients at 10MHz, Table 10-25. Rev 5.0 Updated values in Power-On Reset Low Voltage, Table 10-6. Rev 6.0 Correcting package pin numbers in Table 2-2, PhaseA0 changed from 38 to 52, PhaseB0 changed from 37 to 51, Index0 changed from 36 to 50, and Home0 changed from 35 to 49. All pin changes in Table 2-2 were do to data entry errors - This package pin-out has not changed Rev 7.0 Added Part 4.8, added addition text to Part 6.9 on POR reset, added the word access to FM Error Interrupt in Table 4-3, removed min and max numbers only documenting Typ. numbers for LVI in Table 10-6. Rev 8.0 Updated numbers in Table 10-7 and Table 10-8 with more recent data. Corrected typo in Table 10-3 in Pd characteristics. Rev 9.0 Replace any reference to Flash Interface Unit with Flash Memory Module changed example in Part 2.2 added note on V and V in Table 2-2 and Table 11-1 added note to Vcap pin in REFH REFLO Table 2-2 corrected typo FIVAL1 and FIVAH1 in Table 4-12 removed unneccessary notes in Table 10-12 corrected temperature range in Table 10-14 added ADC calibration information to Table 10-24 and new graphs in Figure 10-21. Rev 10.0 Clarification to Table 10-23, corrected Digital Input Current Low (pull-up enabled) numbers in Table 10-5. Removed text and Table 10-2 replaced with note to Table 10-1. Rev. 11.0 Added 56F8123 information edited to indicate differences in 56F8323 and 56F8123.Reformatted for Freescale look and feel. Updated Temperature Sensor and ADC tables, then updated balance of electrical tables for consistency throughout the family. Clarified I/O power description in Table 2-2, added note to Table 10-7 and clarified Section 12.3 . Rev 12.0 Added output voltage maximum value and note to clarify in Table 10-1 also removed overall life expectancy note, since life expectancy is dependent on customer usage and must be determined by reliability engineering. Clarified value and unit measure for Maximum allowed P in Table 10-3. D Corrected note about average value for Flash Data Retention in Table 10-4. Added new RoHS-compliant orderable part numbers in Table 13-1. Rev 13.0 Deleted formula for Max Ambient Operating Temperature (Automotive) and Max Ambient Operating Temperature (Industrial) in Table 10-4. Added RoHS-compliance and pb-free language to back cover. 56F8323 Technical Data, Rev. 17 2 Freescale Semiconductor Preliminary