56F8346/56F8146 Data Sheet Preliminary Technical Data 56F8300 16-bit Digital Signal Controllers MC56F8346 Rev. 15 01/2007 freescale.com Document Revision History Version History Description of Change Rev 1.0 Pre-Release version, Alpha customers only Rev 2.0 Initial Public Release Rev 3.0 Corrected typo in Table 10-4, Flash Endurance is 10,000 cycles. Addressed additional grammar issues. Rev 4.0 Added Typical Min values to Table 10-16. Edited grammar, spelling, consistency of language throughout family. Updated values in Current Consumption per Power Supply Pin, Table 10-7, Regulator Parameters, Table 10-9, External Clock Operation Timing Requirements Table 10-13, SPI Timing, Table 10-18, ADC Parameters, Table 10-24, and IO Loading Coefficients at 10MHz, Table 10-25. Rev 5.0 Added Part 4.8. Added the word access to FM Error Interrupt in Table 4-5. Removed min and max numbers. Clarified CSBAR 0 and CSBAR 1 reset values in Table 4-10. Removed min and max numbers, only documenting Typ. numbers for LVI in Table 10-6. Rev 6.0 Updated numbers in Table 10-7 and Table 10-8 with more recent data. Corrected typo in Table 10-3 in Pd characteristics. Rev 7.0 Replaced any reference to Flash Interface Unit with Flash Memory Module. Added note to V pin in Table 2-2. Removed unneccessary notes in Table 10-12. Corrected temperature CAP range in Table 10-14. Added ADC calibration information to Table 10-24 and new graphs in Figure 10-21. Rev 8.0 Clarified Table 10-22. Corrected Digital Input Current Low (pull-up enabled) numbers in Table 10-5. Removed text and Table 10-2. Replaced with note to Table 10-1. Added 56F8146 information edited to indicate differences in 56F8346 and 56F8146. Refor- Rev 9.0 matted for Freescale look and feel. Updated Temperature Sensor and ADC tables, then updated balance of electrical tables for consistency throughout family. Clarified I/O power description in Table 2-2, added note to Table 10-7 and clarified Section 12.3. Added output voltage maximum value and note to clarify in Table 10-1 also removed overall Rev 10.0 life expectancy note, since life expectancy is dependent on customer usage and must be determined by reliability engineering. Clarified value and unit measure for Maximum allowed P in Table 10-3. Corrected note about average value for Flash Data Retention in D Table 10-4. Added new RoHS-compliant orderable part numbers in Table 13-1. Rev 11.0 Updated Table 10-24 to reflect new value for maximum Uncalibrated Gain Error Rev 12.0 Deleted RSTO from Pin Group 2 (listed after Table 10-1). Deleted formula for Max Ambient Operating Temperature (Automotive) and Max Ambient Operating Temperature (Industrial) in Table 10-4. Added RoHS-compliance and pb-free language to back cover. Rev 13.0 Updated JTAG ID in Section 6.5.4. Added information/corrected state during reset in Table 2-2. Clarified external reference crystal frequency for PLL in Table 10-14 by increasing maximum value to 8.4MHz. 56F8346 Technical Data, Rev. 15 2 Freescale Semiconductor Preliminary