Document Number MKE04P80M48SF0 NXP Semiconductors Rev. 6, 04/2020 Data Sheet: Technical Data MKE04P80M48SF0 KE04 Sub-Family Data Sheet Supports the following: MKE04Z64VLD4(R), MKE04Z128VLD4(R), MKE04Z64VQH4(R), MKE04Z128VQH4(R), MKE04Z64VLH4(R), MKE04Z128VLH4(R), MKE04Z64VLK4(R) and MKE04Z128VLK4(R) Key features Security and integrity modules 80-bit unique identification (ID) number per chip Operating characteristics Voltage range: 2.7 to 5.5 V Human-machine interface Flash write voltage range: 2.7 to 5.5 V Up to 71 general-purpose input/output (GPIO) Temperature range (ambient): -40 to 105C Two 32-bit keyboard interrupt modules (KBI) External interrupt (IRQ) Performance Up to 48 MHz Arm Cortex-M0+ core Analog modules Single cycle 32-bit x 32-bit multiplier One up to 16-channel 12-bit SAR ADC, operation in Single cycle I/O access port Stop mode, optional hardware trigger (ADC) Two analog comparators containing a 6-bit DAC Memories and memory interfaces and programmable reference input (ACMP) Up to 128 KB flash Up to 16 KB RAM Timers One 6-channel FlexTimer/PWM (FTM) Clocks Two 2-channel FlexTimer/PWM (FTM) Oscillator (OSC) - supports 32.768 kHz crystal or 4 One 2-channel periodic interrupt timer (PIT) MHz to 24 MHz crystal or ceramic resonator choice One pulse width timer (PWT) of low power or high gain oscillators One real-time clock (RTC) Internal clock source (ICS) - internal FLL with internal or external reference, 37.5 kHz pre-trimmed Communication interfaces internal reference for 48 MHz system clock Two SPI modules (SPI) Internal 1 kHz low-power oscillator (LPO) Up to three UART modules (UART) Two I2C modules (I2C) System peripherals Power management module (PMC) with three power Package options modes: Run, Wait, Stop 80-pin LQFP Low-voltage detection (LVD) with reset or interrupt, 64-pin QFP/LQFP selectable trip points 44-pin LQFP Watchdog with independent clock source (WDOG) Programmable cyclic redundancy check module (CRC) Serial wire debug interface (SWD) Aliased SRAM bitband region (BIT-BAND) Bit manipulation engine (BME) NXP reserves the right to change the production detail specifications as may be required to permit improvements in the design of its products.KE04 Sub-Family Data Sheet, Rev. 6, 04/2020 2 NXP Semiconductors