Freescale Semiconductor, Inc. Document Number: KL36P121M48SF4
Data Sheet: Technical Data Rev 5 08/2014
Kinetis KL36 Sub-Family
MKL36ZxxxVLH4
48 MHz Cortex-M0+ Based Microcontroller
MKL36Z256VMP4,
MKL36ZxxxVLL4
MKL36ZxxxVMC4
Designed with efficiency in mind. Compatible with all other
Kinetis L families as well as Kinetis K3x family. General purpose
MCU with segment LCD, featuring market leading ultra low-
power to provide developers an appropriate entry-level 32-bit
solution.
64-pin LQFP (LH) 64-pin MAPBGA (MP)
This product offers:
10 x 10 x 1.4 Pitch 0.5 5 x 5 x 1.23 Pitch 0.5
Run power consumption down to 50 A/MHz in very low
mm mm
power run mode
Static power consumption down to 2 A with full state
retention and 4.5 s wakeup
Ultra-efficient Cortex-M0+ processor running up to 48 MHz
with industry leading throughput
100-pin LQFP (LL) 121-pin MAPBGA (MP)
Memory option is up to 256 KB Flash and 32 KB RAM
14 x 14 x 1.4 Pitch 0.5 8 x 8 x 0.8 Pitch 0.65
Energy-saving architecture is optimized for low power with mm mm
90 nm TFS technology, clock and power gating techniques,
and zero wait state flash memory controller
Performance Human-machine interface
48 MHz ARM Cortex -M0+ core Segment LCD controller supporting up to 47
frontplanes and 8 backplanes, or 51 frontplanes and
Memories and memory interfaces
4 backplanes
Up to 256 KB program flash memory
Low-power hardware touch sensor interface (TSI)
Up to 32 KB SRAM
Up to 84 general-purpose input/output (GPIO)
System peripherals
Communication interfaces
Nine low-power modes to provide power optimization
Two 16-bit SPI modules
based on application requirements
I2S (SAI) module
COP Software watchdog
One low power UART module
4-channel DMA controller, supporting up to 63 request
Two UART modules
sources
Two I2C module
Low-leakage wakeup unit
SWD debug interface and Micro Trace Buffer Analog Modules
Bit Manipulation Engine
16-bit SAR ADC
12-bit DAC
Clocks
Analog comparator (CMP) containing a 6-bit DAC
32 kHz to 40 kHz or 3 MHz to 32 MHz crystal oscillator
and programmable reference input
Multi-purpose clock source
Timers
Operating Characteristics
Six channel Timer/PWM (TPM)
Voltage range: 1.71 to 3.6 V
Two 2-channel Timer/PWM modules
Flash write voltage range: 1.71 to 3.6 V
Periodic interrupt timers
Temperature range (ambient): -40 to 105C
Freescale reserves the right to change the detail specifications as may be required to
permit improvements in the design of its products. 20122014 Freescale
Semiconductor, Inc. All rights reserved. 16-bit low-power timer (LPTMR)
Real time clock
Security and integrity modules
80-bit unique identification number per chip
1
Ordering Information
Part Number Memory Maximum number of I\O's
Flash (KB) SRAM (KB)
MKL36Z64VLH4 64 8 54
MKL36Z128VLH4 128 16 54
MKL36Z256VLH4 256 32 54
MKL36Z256VMP4 256 32 54
MKL36Z64VLL4 64 8 84
MKL36Z128VLL4 128 16 84
MKL36Z256VLL4 256 32 84
MKL36Z128VMC4 128 16 84
MKL36Z256VMC4 256 32 84
1. To confirm current availability of ordererable part numbers, go to