MKV10Z128VLH7 NXP

Freescale Semiconductor, Inc. KV10P48M75 Data Sheet: Technical Data Rev 4, 02/2015 Kinetis V Series KV10, 32/16 KB MKV10Z32VLC7 MKV10Z32VFM7 Flash MKV10Z32VLF7 75 MHz Cortex-M0+ Based Microcontroller MKV10Z16VLC7 The Kinetis V Series KV1x MCU family is the entry point into the MKV10Z16VFM7 V Series and provides a high-performance, cost-competitive MKV10Z16VLF7 solution for 3-phase sensorless BLDC and PMSM motor control. Built upon the ARM Cortex-M0+ based core running at 75 MHz with hardware square root and divide capability, it delivers a 35% increase in performance versus comparable MCUs allowing it to target BLDC as well as PMSM motors. 32 QFN 32 LQFP Additional features include: 5 x 5 x 0.9 mm Pitch 7 x 7 x 1.4 mm Pitch dual 16-bit analog-to-digital controllers (ADCs) sampling at 0.5 mm 0.8 mm up to 1.2 MS/s in 12-bit mode. multiple motor control timers, up to 32 KB of flash memory and a comprehensive enablement suite from Freescale third-party resources including reference designs, software libraries and powerful motor configuration tools 48 LQFP 7 x 7 x 1.4 mm Pitch 0.5 mm Performance Communication interfaces Up to 75 MHz ARM Cortex-M0+ based core One 16-bit SPI module One I2C module Memories and memory interfaces Two UART modules Up to 32 KB of program flash memory Up to 8 KB of RAM Timers Programmable delay block System peripherals One 6-channel FlexTimer (FTM) for motor control/ Nine low-power modes to provide power optimization general purpose applications based on application requirements Two 2-channel FlexTimers (FTM) with quadrature 4-channel DMA controller decoder functionality SWD interface and Micro Trace buffer 16-bit low-power timer (LPTMR) Bit Manipulation Engine (BME) External watchdog timer Operating Characteristics Advanced independent clocked watchdog Voltage range: 1.71 to 3.6 V Memory Mapped Divide and Square Root (MMDVSQ) Flash write voltage range: 1.71 to 3.6 V module Temperature range (ambient): 40 to 105C Clocks Analog modules 32 to 40 kHz or 3 to 32 MHz crystal oscillator Two 16-bit SAR ADCs Multipurpose clock generator (MCG) with frequency- 12-bit DAC locked loop referencing either internal or external Analog comparator (CMP) containing a 6-bit DAC reference clock and programmable reference input Security and integrity modules Human-machine interface 80-bit unique identification (ID) number per chip General-purpose I/O Hardware CRC module Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its products. 20142015 Freescale Semiconductor, Inc. All rights reserved.1 Ordering Information Part Number Memory Maximum number of I O s Flash (KB) SRAM (KB) MKV10Z32VLC7 32 8 28 MKV10Z32VFM7 32 8 28 MKV10Z32VLF7 32 8 40 MKV10Z16VLC7 16 8 28 MKV10Z16VFM7 16 8 28 MKV10Z16VLF7 16 8 40 1. To confirm current availability of ordererable part numbers, go to