MKV11Z64VFM7 NXP

NXP Semiconductors KV11P64M75 Data Sheet: Technical Data Rev. 6, 10/2020 Kinetis V Series KV10 and KV11, MKV11Z128VXX7 MKV11Z64VXX7 128/64 KB Flash MKV10Z64VXX7 75 MHz Cortex-M0+ Based Microcontroller MKV10Z128VXX7 The Kinetis V Series KV11x MCU family is built on Arm Cortex-M0+ core and enabled by innovative 90nm thin film storage (TFS) flash process technology. The KV11x is an extension of the existing KV10x family providing increased memory, higher pin count, additional FTMs and a FlexCAN serial 32 QFN 64 LQFP interface. 5 x 5 x 1.23 mm Pitch 10 x 10 x 1.4 mm Pitch Dual 16-bit ADCs sampling at up to 1.2 MS/s in 12-bit 0.5 mm 0.5 mm mode Highly accurate and flexible motor control timers Ideal for industrial motor control applications, inverters, and low-end power conversion applications 32 LQFP 48 LQFP 7 x 7 x 1.4 mm Pitch 7 x 7 x 1.4 mm Pitch 0.8 mm 0.5 mm Performance Communication interfaces Up to 75 MHz Arm Cortex-M0+ based core One 16-bit SPI module One I2C module Memories and memory interfaces Two UART modules 1 Up to 128 KB of program flash memory One FlexCAN module Up to 16 KB of RAM Timers System peripherals Programmable delay block Nine low-power modes to provide power optimization Two 6-channel FlexTimers (FTM) for motor control/ based on application requirements general purpose applications 8-channel DMA controller Four 2-channel FlexTimers (FTM) with quadrature SWD interface and Micro Trace buffer decoder functionality Bit Manipulation Engine (BME) 16-bit low-power timer (LPTMR) External watchdog timer Advanced independent clocked watchdog Operating Characteristics Memory Mapped Divide and Square Root (MMDVSQ) Voltage range: 1.71 to 3.6 V module Flash write voltage range: 1.71 to 3.6 V Temperature range (ambient): 40 to 105C Clocks 32-40 kHz or 4-32 MHz external crystal oscillator Analog modules Multipurpose clock generator (MCG) with frequency- Two 16-bit SAR ADCs locked loop referencing either internal or external 12-bit DAC reference clock Two analog comparators (ACMP) containing a 6-bit DAC and programmable reference input Security and integrity modules 80-bit unique identification (ID) number per chip Human-machine interface Hardware CRC module General-purpose I/O 1. Available only on KV11 parts NXP reserves the right to change the production detail specifications as may be required to permit improvements in the design of its products.Ordering Information 1 Part Number Memory FlexCAN Maximum number of I O s Flash (KB) SRAM (KB) MKV11Z128VLH7 128 16 Yes 46 MKV11Z128VLF7 128 16 Yes 35 2 MKV11Z128VLC7 128 16 Yes 26 MKV11Z128VFM7 128 16 Yes 26 MKV11Z64VLH7 64 16 Yes 46 MKV11Z64VLF7 64 16 Yes 35 2 MKV11Z64VLC7 64 16 Yes 26 MKV11Z64VFM7 64 16 Yes 26 MKV10Z64VLH7 64 16 No 46 MKV10Z64VLF7 64 16 No 35 2 MKV10Z64VLC7 64 16 No 26 MKV10Z64VFM7 128 16 No 26 MKV10Z128VLH7 128 16 No 46 MKV10Z128VLF7 128 16 No 35 2 MKV10Z128VLC7 128 16 No 26 MKV10Z128VFM7 128 16 No 26 1. To confirm current availability of orderable part numbers, go to