Freescale Semiconductor Document Number: MP3H6115A
Data Sheet: Technical Data Rev. 6.1, 06/2015
MP3H6115A, 15 to 115 kPa, Absolute,
MP3H6115A
Integrated Pressure Sensor
Freescale's MP3H6115A series sensor integrates on-chip, bipolar op amp
circuitry and thin film resistor networks to provide a high output signal and
temperature compensation. The small form factor and high reliability of on-chip
Super small outline package
integration make the Freescale pressure sensor a logical and economical choice
for the system designer.
The MP3H6115A series piezoresistive transducer is a state-of-the-art, monolithic,
signal conditioned, silicon pressure sensor. This sensor combines advanced
micromachining techniques, thin film metallization, and bipolar semiconductor
processing to provide an accurate, high level analog output signal that is
proportional to applied pressure.
MP3H6115A6U/6T1 MP3H6115AC6T1
Features
Case 98ARH99066A Case 98ARH99089A
Improved accuracy at high temperature
Available in super small outline package
Top view
1.5% maximum error over 0 C to 85 C
Ideally suited for microprocessor or microcontroller-based systems
Temperature compensated from -40 C to +125 C
DNC 5 4 V
OUT
Durable thermoplastic (PPS) surface mount package
DNC 6 3 GND
DNC 7 2 V
S
Typical applications
DNC 8 1 DNC
Aviation altimeters
Industrial controls
Engine control/manifold absolute pressure (MAP)
Pin 1 identification,
Weather station and weather reporting device barometers
chamfered corner.
Pinout
Ordering information
# of Ports Pressure type
Device
Part number Shipping Package
marking
None Single Dual Gauge Differential Absolute
Small Outline Package (MP3H6115A series)
MP3H6115A6U Rail 98ARH99066A MP3H6115A
MP3H6115A6T1 Tape and Reel 98ARH99066A MP3H6115A
MP3H6115AC6T1 Tape and Reel 98ARH99089A MP3H6115A
Freescale reserves the right to change the detail specifications as may be required to permit
improvements in the design of its products.
2006-2015 Freescale Semiconductor, Inc. All rights reserved.Contents
1 General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Mechanical and Electrical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Maximum ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 Operating characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 On-chip Temperature Compensation and Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 Package Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.1 Minimum recommended footprint for surface mounted applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.2 Package Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5 Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Related Documentation
The MP3H6115A device features and operations are described in a variety of reference manuals, user guides, and application
notes. To find the most-current versions of these documents:
1. Go to the Freescale homepage at: