NTB0104-Q100 Dual supply translating transceiver auto direction sensing 3-state Rev. 2 18 April 2013 Product data sheet 1. General description The NTB0104-Q100 is a 4-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 4-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (V CC(A) and V ). V can be supplied with any voltage between 1.2 V and 3.6 V. V can CC(B) CC(A) CC(B) be supplied with any voltage between 1.65 V and 5.5 V. The range of supply voltages makes the device suitable for translating between any of the low voltage nodes (1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to V and pins Bn are referenced to V . A LOW CC(A) CC(B) level at pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for partial power-down applications using I . The I circuitry disables OFF OFF the output, preventing the damaging backflow current through the device when it is powered down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from 40 C to +85 C and from 40 C to +125 C Wide supply voltage range: V : 1.2 V to 3.6 V and V : 1.65 V to 5.5 V CC(A) CC(B) I circuitry provides partial Power-down mode operation OFF Inputs accept voltages up to 5.5 V ESD protection: MIL-STD-883, method 3015 Class 2 exceeds 2500 V for A port MIL-STD-883, method 3015 Class 3B exceeds 15000 V for B port HBM JESD22-A114E Class 2 exceeds 2500 V for A port HBM JESD22-A114E Class 3B exceeds 15000 V for B port MM JESD22-A115-A exceeds 200 V (C = 200 pf, R = 0 ) Latch-up performance exceeds 100 mA per JESD 78B Class II Multiple package optionsNTB0104-Q100 NXP Semiconductors Dual supply translating transceiver auto direction sensing 3-state 3. Ordering information Table 1. Ordering information Type number Package Temperature Name Description Version range NTB0104BQ-Q100 40 C to +125 C DHVQFN14 plastic dual in-line compatible thermal enhanced SOT762-1 very thin quad flat package no leads 14 terminals body 2.5 3 0.85 mm NTB0104UK-Q100 40 C to +125 C WLCSP12 wafer level chip-size package, 12 bumps NTB0104UK-Q100 body 1.20 1.60 0.56 mm. (Backside Coating included) 4. Marking Table 2. Marking Type number Marking code NTB0104BQ-Q100 B0104 NTB0104UK-Q100 t04 5. Functional diagram OE A1 B1 A2 B2 A3 B3 A4 B4 V V CC(A) CC(B) 001aam795 Fig 1. Logic symbol NTB0104 Q100 All information provided in this document is subject to legal disclaimers. NXP B.V. 2013. All rights reserved. Product data sheet Rev. 2 18 April 2013 2 of 23