NTS0101GF,132 NXP

NTS0101 Dual supply translating transceiver open drain auto direction sensing Rev. 5 11 August 2014 Product data sheet 1. General description The NTS0101 is a 1-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 1-bit input-output ports (A and B), one output enable input (OE) and two supply pins (V and V ). V CC(A) CC(B) CC(A) can be supplied at any voltage between 1.65 V and 3.6 V. V can be supplied at any CC(B) voltage between 2.3 V and 5.5 V. This flexibility makes the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins A and OE are referenced to V and pin B is referenced to V . A LOW level at pin OE causes the CC(A) CC(B) outputs to assume a high-impedance OFF-state. This device is fully specified for partial power-down applications using I . The I circuitry disables the output, preventing the OFF OFF damaging backflow current through the device when it is powered down. 2. Features and benefits Wide supply voltage range: V : 1.65 V to 3.6 V and V : 2.3 V to 5.5 V CC(A) CC(B) Maximum data rates: Push-pull: 50 Mbps I circuitry provides partial Power-down mode operation OFF Inputs accept voltages up to 5.5 V ESD protection: HBM JESD22-A114E Class 2 exceeds 2500 V for A port HBM JESD22-A114E Class 3B exceeds 8000 V for B port MM JESD22-A115-A exceeds 200 V CDM JESD22-C101E exceeds 1500 V Latch-up performance exceeds 100 mA per JESD 78B Class II Multiple package options Specified from 40 Cto+85 C and 40 Cto+125 C 3. Applications 2 I C/SMBus UART GPIONTS0101 NXP Semiconductors Dual supply translating transceiver open drain auto direction sensing 4. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version NTS0101GW 40 Cto+125 C SC-88 plastic surface-mounted package 6 leads SOT363 NTS0101GM 40 Cto+125 C XSON6 plastic extremely thin small outline package no leads SOT886 6 terminals body 1 1.45 0.5 mm NTS0101GF 40 C to +125 C XSON6 plastic extremely thin small outline package no leads SOT891 6 terminals body 1 1 0.5 mm NTS0101GS 40 C to +125 C XSON6 extremely thin small outline package no leads SOT1202 6 terminals body 1.0 1.0 0.35 mm 5. Marking Table 2. Marking 1 Type number Marking code NTS0101GW s1 NTS0101GM s1 NTS0101GF s1 NTS0101GS s1 1 The pin 1 indicator is on the lower left corner of the device, below the marking code. 6. Functional diagram GATE BIAS 5 OE 3 A 4 B V V CC(A) CC(B) 001aan317 Fig 1. Logic symbol NTS0101 All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2014. All rights reserved. Product data sheet Rev. 5 11 August 2014 2 of 23