Document Number: MC56F847XX Freescale Semiconductor Rev. 3.1, 06/2014 Data Sheet: Technical Data MC56F847XX MC56F847XX Supports the 56F84789VLL, 56F84786VLK, 56F84769VLL, 56F84766VLK, 56F84763VLH Features Analog This family of digital signal controllers (DSCs) is Two high-speed, 8-channel, 12-bit ADCs with based on the 32-bit 56800EX core. Each device dynamic x2, x4 programmable amplifier combines, on a single chip, the processing power of a One 20-channel, 16-bit ADC DSP and the functionality of an MCU with a flexible Four analog comparators with integrated 6-bit DAC set of peripherals to support many target applications: references Industrial control One 12-bit DAC Home appliances PWMs and timers Smart sensors Two eFlexPWM modules with up to 24 PWM Fire and security systems outputs, one including 8 channels with high Switched-mode power supply and power resolution NanoEdge placement management Two 16-bit quad timer (2 x 4 16-bit timers) Uninterruptible Power Supply (UPS) Two Periodic Interval Timers (PITs) Solar and wind power generator One Quadrature Decoder Power metering Two Programmable Delay Blocks (PDBs) Motor control (ACIM, BLDC, PMSM, SR, stepper) Handheld power tools Communication interfaces Circuit breaker Three high-speed queued SCI (QSCI) modules with Medical device/equipment LIN slave functionality Instrumentation Up to three queued SPI (QSPI) modules Lighting Two SMBus-compatible I2C ports One flexible controller area network (FlexCAN) DSC based on 32-bit 56800EX core module Up to 100 MIPS at 100 MHz core frequency DSP and MCU functionality in a unified, C-efficient Security and integrity architecture Cyclic Redundancy Check (CRC) generator Computer operating properly (COP) watchdog On-chip memory External Watchdog Monitor (EWM) Up to 288 KB (256 KB + 32 KB) flash memory, including up to 32 KB FlexNVM Clocks Up to 32 KB RAM Two on-chip relaxation oscillators: 8 MHz (400 kHz Up to 2 KB FlexRAM with EEE capability at standby mode) and 32 kHz 100 MHz program execution from both internal Crystal / resonator oscillator flash memory and RAM On-chip flash memory and RAM can be mapped System into both program and data memory spaces DMA controller Integrated power-on reset (POR) and low-voltage interrupt (LVI) and brown-out reset module Inter-module crossbar connection JTAG/enhanced on-chip emulation (EOnCE) for unobtrusive, real-time debugging Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its products. 20112014 Freescale Semiconductor, Inc.Operating characteristics Single supply: 3.0 V to 3.6 V 5 Vtolerant I/O (except RESETB pin) LQFP packages: 64-pin 80-pin 100-pin MC56F847XX Data Sheet, Rev. 3.1, 06/2014. 2 Freescale Semiconductor, Inc.