PCA9561PW,118 NXP

PCA9561 2 Quad 6-bit multiplexed I C-bus EEPROM DIP switch Rev. 4 6 November 2012 Product data sheet 1. General description The PCA9561 is a 20-pin CMOS device consisting of four 6-bit non-volatile EEPROM registers, six hardware pin inputs and a 6-bit multiplexed output. It is used for DIP switch-free or jumper-less system configuration and supports Mobile and Desktop VID Configuration, where five preset values (four sets of internal non-volatile registers and one set of external hardware pins) set processor voltage for operation in various performance or battery conservation sleep modes. The PCA9561 is also useful in server and telecommunications/networking applications when used to replace DIP switches or 2 jumpers, since the settings can be easily changed via I C-bus/SMBus without having to power down the equipment to open the cabinet. The non-volatile memory retains the most current setting selected before the power is turned off. The PCA9561 typically resides between the CPU and Voltage Regulator Module (VRM) when used for CPU VID (Voltage IDentification code) configuration. It is used to bypass the CPU-defined VID values and provide a different set of VID values to the VRM, if an increase in the CPU voltage is desired. An increase in CPU voltage combined with an increase in CPU frequency leads to a performance boost of up to 7.5 %. Lower CPU voltage reduces power consumption. The main advantage of the PCA9561 over older devices, such as the PCA9559 or PCA9560, is that it contains four internal non-volatile EEPROM registers instead of just one or two, allowing five independent settings which allows a more accurate CPU voltage tuning depending on specific applications. The PCA9561 has two address pins, allowing up to four devices to be placed on the same 2 I C-bus or SMBus. 2. Features and benefits 2 Selection of non-volatile register n as source to MUX OUT pins via I C-bus 2 I C-bus can override MUX SELECT pin in selecting output source 6-bit 5-to-1 multiplexer DIP switch Four internal non-volatile registers 2 Internal non-volatile registers programmable and readable via I C-bus Six open-drain multiplexed outputs 400 kHz maximum clock frequency Operating supply voltage 3.0 V to 3.6 V 5 V and 2.5 V tolerant inputs/outputs Useful for Speed Step configuration of laptop computer 2 Two address pins, allowing up to four devices on the I C-bus 2 MUX IN values readable via I C-busPCA9561 NXP Semiconductors 2 Quad 6-bit multiplexed I C-bus EEPROM DIP switch ESD protection exceeds 200 V HBM per JESD22-A114 and 1000 V CDM per JESD22-C101 Latch-up testing is done to JESDEC Standard JESD78 which exceeds 100 mA 3. Ordering information Table 1. Ordering information = 40 C to +85 C. T amb Type number Topside Package marking Name Description Version PCA9561PW PCA9561 TSSOP20 plastic thin shrink small outline package 20 leads SOT360-1 body width 4.4 mm 3.1 Ordering options Table 2. Ordering options Type number Orderable Package Packing method Minimum Temperature part number order quantity PCA9561PW PCA9561PW,118 TSSOP20 Reel pack, SMD, 2500 T = 40 Cto +85 C amb 13-inch PCA9561PW,112 TSSOP20 Tube, Bulk 1875 T = 40 Cto +85 C amb PCA9561 All information provided in this document is subject to legal disclaimers. NXP B.V. 2012. All rights reserved. Product data sheet Rev. 4 6 November 2012 2 of 26