PN5331B3HN NXP

PN533 Near Field Communication (NFC) controller Rev. 3.3 16 July 2012 Product short data sheet 158233 PUBLIC 1. General description The PN533 is a highly integrated transceiver module for contactless communication at 13.56 MHz based on the 80C51 microcontroller core. A dedicated ROM code is implemented to handle different RF protocols. 1.1 RF protocols The PN533 supports four main operating modes: ISO/IEC 14443A Reader/Writer (including MIFARE product family) ISO/IEC 14443B Reader/Writer FeliCa Reader/Writer ISO/IEC 18092, ECMA 340 Peer-to-Peer The PN533 hardware implements a demodulator and decoder for signals from ISO/IEC 14443A compatible cards and transponders. The PN533 hardware handles the complete ISO/IEC 14443A framing and error detection and upper layers of this protocol (i.e. ISO/IEC 14443-4) are implemented in firmware. The PN533 supports all MIFARE products (e.g. MIFARE crypto method). It supports contactless communication using higher transfer speeds up to 848 kbit/s in both directions. The PN533 hardware supports layers 2 and 3 of the ISO/IEC 14443B Reader/Writer communication scheme, except anticollision. Anticollision is implemented in firmware as well as upper layers (i.e. ISO/IEC 14443-4). The PN533 can demodulate and decode FeliCa coded signals. The PN533 handles the FeliCa framing and error detection. It supports contactless communication using FeliCa Higher transfer speeds up to 424 kbit/s in both directions. Compliant to ECMA 340 and ISO/IEC 18092 NFCIP-1 Passive and Active communication modes, the PN5331B3HN/C270 offers the possibility to communicate to another NFCIP-1 compliant device, at transfer speeds up to 424 kbit/s. The PN533 handles the complete NFCIP-1 framing and error detection. 1.2 Interfaces The PN533 supports USB 2.0 full speed interface (bus powered or host powered mode). 2 PN533 also has a master I C interface enabling the drive of following peripherals: An external EEPROM A TDA8029 smart card reader PN533 NXP Semiconductors Near Field Communication (NFC) controller 1.3 Standards compliancy PN533 offers commands in order for applications to be compliant in reader mode with Paypass-ISO/IEC 14443 Implementation v1.1. PN533 supports RF protocols ISO/IEC 14443A and B such as compliancy with Smart eID standard can be achieved at application level. A dedicated command is implemented in PN533 firmware to support NFC secure applications in accordance with NFC sec Security layer for NFC specification in order to enable USB wireless or BT enabler applications in a host baseband. 2. Features and benefits 80C51 microcontroller core with 45056 bytes ROM and 1224 bytes RAM Highly integrated demodulator and decoder Buffered output drivers to connect an antenna with minimum number of external components Integrated RF level detector Integrated data mode detector Supports ISO/IEC 14443A Reader/Writer mode up to 848 kbit/s Supports ISO/IEC 14443B Reader/Writer mode up to 848 kbit/s Supports MIFARE encryption in Reader/Writer mode and higher transfer speed communication at 212 kbit/s, 424 kbit/s and 848kbit/s Supports contactless communication according to the FeliCa protocol at 212 kbit/s and 424 kbit/s Typical operating distance in Reader/Writer mode for communication to ISO/IEC 14443A/MIFARE, ISO/IEC 14443B or FeliCa cards up to 50 mm depending on antenna size and tuning Support NFCIP-1 mode up to 424 kbit/s Typical operating distance in NFCIP-1 mode up to 50 mm depending on antenna size, tuning and power supply Supported USB 2.0 full speed interface 2 2 Restricted I C master interface to control an external I C EEPROM or TDA8029 smart card reader Low-power modes Hard-Power-Down mode Soft-Power-Down mode 27.12 MHz Crystal oscillator On-Chip PLL to generate internally 96 MHz for the USB interface Power modes USB bus power mode 2.5 V to 3.6 V power supply operating range in non-USB bus power mode Dedicated IO ports for external device control PN533 SDS All information provided in this document is subject to legal disclaimers. NXP B.V. 2012. All rights reserved. Product short data sheet Rev. 3.3 16 July 2012 PUBLIC 158233 2 of 9