PR533 USB NFC integrated reader solution Rev. 3.6 29 November 2017 Product data sheet 208936 COMPANY PUBLIC 1. General description The PR5331C3HN is a highly integrated transceiver module for contactless reader/writer communication at 13.56 MHz. A dedicated ROM code is implemented to handle different RF protocols by an integrated microcontroller. The system host controller communicates with the PR5331C3HN by using the USB or the HSU link. The protocol between the host controller and the PR5331C3HN, on top of this physical link is the CCID protocol. 1.1 RF protocols PR5331C3HN supports the PCD mode for FeliCa (212 kbps and 424 kbps), ISO/IEC14443 Type A and B (from 106 kbps to 848 kbps), MIFARE (106 kbps), B cards (106 kbps), picoPass tag (106 kbps) and Innovision Jewel cards (106 kbps) The Initiator passive mode (from 106 kbps to 424 kbps) can be supported through the PC/SC transparent mode. 1.2 Interfaces The PR5331C3HN supports a USB 2.0 full speed interface (bus powered or host powered mode). Alternatively to the USB interface, a High Speed UART (from 9600b up to 1.2 Mb) can be used to connect the PR533 to a host. 2 The R5331C3HN has also a master I C-bus interface that allows to connect one of the following peripherals: An external EEPROM: in this case the PR5331C3HN is configured as master and is able to communicate with external EEPROM (address A0h) which can store configuration data like PID, UID and RF parameters. When a USB host interface is used, these parameters are retrieved from the EEPROM at startup of the device A TDA8029 contact smart card reader 1.3 Standards compliancy PR5331C3HN offers commands in order for applications to be compliant with EMV Contactless Communication Protocol Specification V2.0.1. PR5331C3HN supports RF protocols ISO/IEC 14443A and B such as compliancy with Smart eID standard can be achieved at application level.PR533 NXP Semiconductors USB NFC integrated reader solution Support of USB 2.0 full speed, interoperable with USB 3.0 hubs The PR533C3HN in PCD mode is compliant with EMV contactless specification V2.0.1. 1.4 Supported operating systems Microsoft Windows 2000 Microsoft Windows XP (32 and 64 bits) Microsoft Windows 2003 Server (32 and 64 bits) Microsoft Windows 2008 Server (32 and 64 bits) Microsoft Windows Vista (32 and 64 bits) Microsoft Windows 7 (32 and 64 bits) The PR533 is supported by the following OS through the PCSC-Lite driver: GNU/Linux using libusb 1.0.x and later Mac OS Leopard (1.5.6 and newer) Mac OS Snow Leopard (1.6.X) Solaris FreeBSD 2. Features and benefits USB 2.0 full speed host interface and CCID protocol support Integrated microcontroller implements high-level RF protocols Buffered output drivers to connect an antenna with minimum number of external components Integrated RF level detector Integrated data mode detector Supports ISO/IEC 14443A Reader/Writer mode up to 848 kbit/s Supports ISO/IEC 14443B Reader/Writer mode up to 848 kbit/s Supports contactless communication according to the FeliCa protocol at 212 kbit/s and 424 kbit/s Supports MIFARE encryption Typical operating distance in Read/Write mode for communication to ISO/IEC 14443A/MIFARE, ISO/IEC 14443B or FeliCa cards up to 50 mm depending on antenna size and tuning I2C-bus master interface allows to connect an external I2C EEPROM for configuration data storage or to control a TDA8029 contact smart card reader Low-power modes Hard power-down mode Soft power-down mode Only one external oscillator required (27.12 MHz Crystal oscillator) Power modes USB bus power mode 2.5 V to 3.6 V power supply operating range in non-USB bus power mode PR533 All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2017. All rights reserved. Product data sheet Rev. 3.6 29 November 2017 COMPANY PUBLIC 208936 2 of 216