Rapid prototyping platform for IoT and industrial control applications TWR-LS1021A: Tower System Module The QorIQ TWR-LS1021A Tower System module is the most feature-rich and high- performance Tower System we offer. TARGET APPLICATIONS Tower System main processor board, which enables true single board designs to be supported. As a result, both design effort Secure access point and complexity are reduced. In addition, the TWR-LS1021A Secure hot spot module offers HDMI, SATA3 and USB3 connectors and a complete Linux software developers package. Secure IoT gateways The TWR-LS1021A module provides a comprehensive level of HMI enabled Programmable Logic Controller security that includes support for secure boot, Trust Architecture Secure network attached storage (NAS) and tamper detection, in both standby and active power modes. Together, these features safeguard the device from the Asset management and tracking point of manufacture to the point of deployment. This ensures HMI enabled controller the device is protected from malicious hacking and guarantees end products can support highly secure nodes. Robotics It enables compatibility and interoperability with the READY-TO-USE DESIGN growing list of Tower expansion modules, providing an easily The QorIQ TWR-LS1021A module, as well as the TWR-LCD accessible and interchangeable suite of capabilities and and TWR-IND-IO expansion module, can be ordered directly features to support rapid prototyping as well as software from us or our authorized distributors. The kit includes a development programs. The TWR-LS1021A module is fully tested TWR-LS1021A main processor module, quick engineered to enable a wide range of applications, from IoT start guide, user manual, power cord and connector cables. gateways to industrial controllers, secure access points and Also available are the complete board design files including asset management systems. Customers benefit from the high schematics, bill of materials and GERBER files at no charge. level of integration, excellent balance of performance to power, and robust reliability. Setting the TWR-LS1021A module apart is its outstanding level of performance delivered by the QorIQ LS1021A processor incorporating dual ARM Cortex -A7 cores running up to 1 GHz and delivering more than 5,000 Coremarks of performance. The module offers higher integration levels than any prior KEY FEATURES TWR-LCD-RGB TWR-ETHERCAT-SLV QorIQ LS1021A processor, featuring dual ARM Cortex-A7 cores, 32 KB I/D L1 cache Included in Kit: with ECC protection, 512 KB coherent L2 Linux and CodeWarrior ARM toolchain cache with ECC protection software included 1 Gbit parallel NOR flash Reference design (schematics, layout and BOM available) 128 Mbit quad SPI flash Hardware quick start guide and user 1 GB DDR3L guide Full-size SDHC slot-up to 32 GB ORDERING INFORMATION 4 Kbit EEPROM Orderable Price ( USD 2 x 10/100/1000 Ethernet (SGMII) Suggested Resale) Part Number Figure 1. TWR-LS1021A module (TWR-LS1021A, TWR-LS1021A 269 TWR-SER-IO and TWR-ELEV) 1 x 10/100/1000 Ethernet (RGMII) 2 x mini PCIe (x 1) connectors QorIQ TWR-LS1021A BOARD (802.11ac/n/g, combo 802.11/Bluetooth , 802.15.4, 6LoWPAN as well as 4G/LTE Top of board 10-pin JTAG cards) SATA3 connector Power 1 x mSATA 3.0 slot connection 1x USB2 mini port Muxed LCD/QE interface HDMI connector 24-bit LVDS LCD interface On-board mic 2x Gbit Ethernet ports 1 x HDMI connector Speaker jack 2 x QE UART to TWR-ELEV for PROFIBUS or RS485 (external 1x Gbit Ethernet port and 2x type A USB3.0 ports transceiver needed) LS1021A processor Audio Bottom of board Audio OUT via HDMI or jack plug Audio IN via onboard mic USB 3.0 2 x portsUSB-type A 2 x ports to mini PCIe slots (LTE/4G Full size SD card slot cellular radios) 2 2 x SPI bus and 3 x I C bus 2x Mini PCIe Connector OpenSDA debug support Run-control debug CODEWARRIOR DEVELOPMENT SUITES FOR NETWORKED APPLICATIONS Flash programmer CodeWarrior Development Studio for QorIQ LS series featuring ARMv7 is a development UART to USB converter software tool created by and is based on award-winning CodeWarrior IDE technology. This Certification: FCC Class B and CE software is one of the first software tools used and developed in lockstep with the QorIQ LS series of communications processors. The software can be obtained by purchasing any of Expansion options: the CodeWarrior Development Suites for Networked Applications. Tower System boards supported via TWR-EVEL The Tower edition suite contains the complete CodeWarrior Development Studio for QorIQ TWR-IND-IO LS Series for ARMv7 ISA. It is optimized to provide an economic development platform - 2 x CAN, RS485, RS232 (up to two for the Tower System modules only. It is an easy upgrade to extend the Tower Edition to boards supported) the Suite edition and works with any QorIQ LS series-based boards. For more information TWR-LCD please visit www.nxp.com/CWARM7. www.nxp.com/TowerSystem 20142015 Freescale Semiconductor, Inc. CodeWarrior, QorIQ and Tower are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. Layerscape Document Number: is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property of their respective TWRLS1021AFS REV 1 owners. ARM and Cortex are registered trademarks of ARM Limited (or its subsidiaries) in the EU and/or elsewhere.