C200H-ID501 Omron

ORDERING GUIDE CPU Rack . . . . . . . . . . . . . . . . . . . . . . . . . . 147 PRODUCT PERFORMANCE System Overview Expansion Racks . . . . . . . . . . . . . . . . . . . . 148 STANDARDS C200H Basic I/O Modules . . . . . . . . . . . . . . 149 OMRON devices that comply with EC Directives B7A Terminals also conform to the related EMC standards so Link Master Adapters for High-density that they can be more easily built into other I/O PLC Modules devices or the overall machine. The actual C200H High-density I/O Modules . . . . . . . . 153 products have been checked for conformity to Connectors for C200H High-density I/O Modules EMC standards (see the following note). Whether CPU Overview the products conform to the standards in the C200H Group-2 High-density system used by the customer, however, must be I/O Modules . . . . . . . . . . . . . . . . . . . . . . . . 154 confirmed by the customer. Connectors for C200H Group-2 EMC-related performance of the OMRON devices High-density I/O Modules that comply with EC Directives will vary CS1 High-density I/O Modules . . . . . . . . . . 155 depending on the configuration, wiring, and other Connectors for CS1 High-density I/O Modules conditions of the equipment or control panel on High-density I/O Screw Terminal Blocks which the OMRON devices are installed. The and Cables . . . . . . . . . . . . . . . . . . . . . . . . . 156 Basic System Configuration customer must, therefore, perform the final Screw Terminal Block and Cables check to confirm that devices and the overall machine conform to EMC standards. High-density I/O Relay Blocks, Bases and Dedicated Cables . . . . . . . . . . . . . . . . . 157 Applicable EMC Standards G7TC Relay Blocks EMS (Electromagnetic Susceptibility): EN61131-2 P7TF Block Bases and I/O Relays EMI (Electromagnetic Interference): EN50081-2 Accessories (Radiated emission: 10-m regulations) Relay Output Blocks I/O Types and Allocations Relay Terminal Block Bases OMRON Power Supply Modules and I/O Modules have been determined safe when operating at Relays for use with G70A Bases voltages of 50 to 1,000 VAC and 75 to 1,500 VDC Dedicated Connecting Cable for Omron PLC Modules according to the safety standards in EN61131-2. C200H Special I/O Modules . . . . . . . . . . . . 160 Standards Description CS1 Special I/O Modules . . . . . . . . . . . . . . 165 U = UL, Underwriters Laboratories, Inc. CS1/C200H Non-compatible Modules . . . . . 167 Modules not compatible with CS1 Controllers C = CSA, Canadian Standards Association or Systems Modules CE = CE, CE Marking CS1 Communications and N = Nemko, Norges Elektriske Materiellkontroll Network Modules . . . . . . . . . . . . . . . . . . . . 168 L = Lloyds Register of shipping Communications and Network Modules Special Note: For current consumption, refer to Fiber-Optic Cables and Connectors for Current Consumption Tables (the last 6 pages Controller Link of this ordering guide). DeviceNet Products . . . . . . . . . . . . . . . . . . 169 Peripheral Hardware DeviceNet Multiple I/O Terminal Modules . 170 DeviceNet Communications Module and Software Digital I/O Modules Relay Output Modules Analog I/O Modules Counter Module CompoBus/S Slave Modules . . . . . . . . . . . . 171 Long Distance CompoBus/S Slave Modules (NEW ) . . . . . . . . . . . . . . . . 172 Instruction Set Optional Products . . . . . . . . . . . . . . . . . . . . 173 Module Accessories Mounting Rails and Accessories Current Consumption Tables . . . . . . . . . . . . 174 CPU Racks and Expansion Racks SYSMAC BUS Slave Racks Example Calculations Ordering Guide 5 VDC Voltage Group . . . . . . . . . . . . . . . . . . . . .176 Basic I/O Modules High-density I/O Modules (Special I/O) Special I/O Modules CS1 CPU BUS Modules 26 VDC Modules . . . . . . . . . . . . . . . . . . . . . . . .181 Reference Information479