Safety I/O Terminals DST1 Series CSM DST1 Series DS E 7 4 Distributed Safety Terminals That Reduce Wiring. Lineup includes four models to accommodate various I/O types and number of I/O points. Monitor the safety system from Standard Controllers across the network. EN954-1 (Cat.4), ISO13849-1 (PLe), and IEC 61508 SIL3 certification. The DST1-XD0808SL-1 also supports logic operation functions for high-speed processing in applications requiring partial stopping of the safety system. Ordering Information List of Models Name No. of I/O points Model Safety inputs: 12, test outputs: 4 DST1-ID12SL-1 DST1-MD16SL-1 Safety I/O Terminals Safety inputs: 8, safety outputs (semiconductor): 8, test outputs: 4 DST1-XD0808SL-1 * Safety inputs: 4, safety outputs (relay): 4, test outputs: 4 DST1-MRD08SL-1 Note: The standard DS1T Safety I/O Terminals are equipped with spring-cage terminal blocks, but screw terminal blocks are available if desired, e.g., to replace previous terminals. Refer to DeviceNet Safety Accessories. *Use the Network Configurator Ver. 2.0 or later to make DST1-XD0808SL-1 settings. Specifications Certified Standards Specifications Certification Model Standard DST1- DST1- DST1- DST1- body ID12SL-1 MD16SL-1 MRD08SL-1 XD0808SL-1 Item EN ISO 13849-1 EN ISO 13849-2 Communications IEC 61508 power supply 11 to 25 VDC supplied via communications connector TV Rheinland EN 62061 voltage EN 61131-2 I/O power supply IEC 61326-3-1 20.4 to 26.4 VDC (24 VDC 15%/+10%) voltage UL508 Commu- ISA12.12.01 (excluding the DST1-MRD08SL-1) UL nications 24 VDC 24 VDC 24 VDC 24 VDC UL1998 power 100 mA 110 mA 100 mA 110 mA IEC 61508-3 Current supply con- 24 VDC 24 VDC 24 VDC sump- I/O 50 mA 80 mA 50 mA tion 24 VDC power (Input) (Input) (Input) 70 mA supply * 130 mA 130 mA 130 mA (Output) (Output) (Output) Overvoltage II category Noise immunity Conforms to IEC61131-2. Vibration 10 to 57 Hz: 0.35-mm single amplitude, 57 to 150 Hz: 2 resistance 50 m/s 2 2 100 m/s , 150 m/s , 2 Shock resistance 150 m/s , 11 ms 11 ms 11 ms Mounting method 35-mm DIN Track Ambient operating 10 to 55C temperature 10% to 85% 10% to 95% Ambient operating 10% to 95% (with no (with no (with no humidity condensation) condensation) condensation) Ambient storage 40 to 70C temperature Degree of protection IP20 Weight 420 g 600 g 420 g *Not including power consumption for external devices. 1DST1 Series Safety Input Specifications Safety Output Specifications (Common with the DST1 Series) (Relay Output) Input type Sinking inputs (PNP) (DST1-MRD08SL-1) ON voltage 11 VDC min. Applicable relays G7SA-2A2B, EN50205 Class A OFF voltage 5 VDC max. Failure rate P level * 5 VDC, 1 mA OFF current 1 mA max. (Reference value) Input current 6 mA Rated load (resistive) 2 A at 240 VAC, 2 A at 30 VDC 5,000,000 operations min. Mechanical Safety Output Specifications (at 7,200 operations/h) Durabili- ty 100,000 operations min. (Semiconductor output) Electrical (at 1,800 operations/h with a resistive load) (Common with the DST1-MD16SL-1/XD0808SL-1) *This value is equivalent to 300 operations/minute. Output type Sourcing outputs (PNP) CIP Safety on DeviceNet Communications Rated output current 0.5 A max./output ON residual voltage 1.2 V max. Safety Slave Max. 4 connections communications (Max. 2 connections for the DST1-XD0808SL-1) Leakage current 0.1 mA max. DeviceNet Slave Communications Test Output Specifications (Common with the DST1 Series) (Common with the DST1 Series) Standard Slave Output type Sourcing outputs (PNP) Max. 2 connections communications Rated output current 0.7 A max./output ON residual voltage 1.2 V max. Leakage current 0.1 mA max. Internal Circuit Configuration DST1-ID12SL-1 DC-DC Converter (Non-insulated) Internal Circuits V+ CAN H Shield CAN L Input Power Safety Input Circuit Test Output Circuit (Sink input) (Source output) Supply Circuit V 1234567 8 910 2122232425262728 29 30 V V IN0 IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 IN9 IN10 IN11 T2 T2 T2 T3 T3 T3 11 12 13 14 15 16 17 18 19 20 31 32 33 34 35 36 37 38 39 40 G G T0 T1 T0 T1 T0 T1 T0 T1 T0 T1 T0 T1 G G G G G G Terminal Name Function No. 1, 2 V Power supply terminal (24 VDC) for input device and test output 11, 12 G Common terminal 35 to 40 G (Terminal No. 11, 12 and 35 to 40 are internally connected.) 3 to 10 IN0 to Safety input terminal 21 to 24 IN11 13 to 20 25 to 30 T0 to T3 Test output terminal 31 to 34 2 DeviceNet Physical Layer