Smart Laser Sensors E3NC CSM E3NC DS E 2 1 Ideal for Applications That Cannot Be Handled with Fiber Sensors or Photoelectric Sensors A wide variety of easy-to-use Laser Photoelectric Sensor Heads. Coaxial Retro-reflective Models (E3NC-LH03). Long-distance, variable spot, Diffuse-reflective Models (E3NC-LH02) Small-spot (0.1 mm dia.), Limited-reflective Models (E3NC-LH01). CMOS Reflective Models (E3NC-SH series). Smart Tuning to achieve stable detection with easy setup. White on black display characters for high visibility. Robot cables for reliable operation in harsh environments. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Refer to the Safety Precautions on page 14. Features Retro-reflective Models: E3NC-LH03 Diffuse-reflective Models: E3NC-LH02 Maximum sensing distance of 8 m. Long-distance detection at up to 1.2 m. Stable detection of many types of workpieces. Spot can be adjusted to the workpiece or application. Stable detection of hi ghly transparent films. 0.0.88 mm mm dia. or largerdia. or larggger 8 m CMOS Laser, Reflective Models: Amplifier Units Same shape as Fiber Amplifier Units plus easy operation. E3NC-SH250H/SH250/SH100 Smart Tuning with one button. Stable detection even for different workpiece colors and materials. Stable detection for inclined Head installation and different workpiece shapes. Glossy Glossy WWhitehite Black Black Cast Cast metaltl ceramici rubbbber metaltl 1E3NC Ordering Information Sensor Heads: E3NC-L Compact Laser Sensor Series (Dimensions page 17) Sensing Laser Appearance Beam shape Sensing distance Cable length Model method class 2 m E3NC-LH03 2M Coaxial Retro- reflective with Spot 8 m * MSR function 5 m E3NC-LH03 5M 2 m E3NC-LH02 2M Diffuse- Variable spot 1.2 m Class 1 reflective 5 m E3NC-LH02 5M 2 m E3NC-LH01 2M Limited- Spot 7015 mm reflective 5 m E3NC-LH01 5M * These values apply when an E39-R21, E39-R22, E39-RS10, or E39-RS11 Reflector is used. A Reflector is not included. Purchase a Reflector separately to match the intended use of the Sensor. Note: Only an E3NC-LA Amplifier Unit can be connected. Amplifier Units: E3NC-L Compact Laser Sensor Series (Dimensions page 19) Model Connecting method Appearance Inputs/outputs NPN output PNP output Pre-wired (2 m) 2 outputs + 1 input E3NC-LA21 2M E3NC-LA51 2M Wire-saving Connector 1 output + 1 input E3NC-LA7 E3NC-LA9 M8 Connector 1 output + 1 input E3NC-LA24 E3NC-LA54 Connector for Sensor --- E3NC-LA0 Communications Unit * * A Sensor Communications Unit is required if you want to use the Amplifier Unit on a network. Note: Only an E3NC-LH Sensor Head can be connected. Sensor Heads: E3NC-S Ultra-compact CMOS Laser Sensor Series (Dimensions page 18) Sensing Laser Appearance Beam shape Measurement range Cable length Model method class Class 2 2 m E3NC-SH250H 2M 35 to 250 mm Distance- 2 m E3NC-SH250 2M Spot settable Class 1 2 m E3NC-SH100 2M 35 to 100 mm Note: Only an E3NC-SA Amplifier Unit can be connected. 2
