G2R-1-S 24DC(S) Omron

G2RV-SR G3RV-SR Common Precautions Common Accessories New Product Slim I/O Relay G2RV-SR/G3RV-SR Global standard size, low profile slim I/O relay with width 6.2 mm, slim I/O solid state relay Realized about 25% lower profile than conventional products, contributing to further miniaturization of the control panel. Push-In Plus terminal blocks are used to save wiring work in comparison with conventional screw terminals. (Wiring time is reduced by 60%* in comparison with traditional screw terminals.) For the recent information on models that have been certified No screw loosening means maintenance-free application, for safety standards, refer to your OMRON website. realizing high reliability Hand-free structure that holds an inserted flat-blade screwdriver to achieve easier wiring work for stranded wires. Screw terminal is also stocked to meet the screw type needs. Mounted relay or solid-state relay has a plug-in terminal that is difficult to bend at the time of exchange. * According to OMRON actual measurement data from November 2015. Refer to Safety Precautions on page 20. Slim I/O Relay Types G2RV-SR series mounted relay: electromagnetic relay ...... from page 2 G3RV-SR series mounted relay: solid state relay ................ from page 10 Common matter Common precautions ................................................................ from page 20 Common accessories (order separately)................................. from page 24 1Common Precautions Common Accessories G2RV-SR G3RV-SR Slim I/O Relay G2RV-SR Global standard size, low profile slim I/O relay with width 6.2 mm Realized about 25% lower profile than conventional products, contributing to further miniaturization of the control panel. Realized opening and closing ability with one pole 6 A slim shape. Micro load products for one pole 50 mA using Au-plated contacts for small load switching also available. Since G2RV is a transparent case, confirming the state of the contact with the naked eye is possible, and easy to confirm abnormality on-site (installed location). For the recent information on models that have been certified Screw terminal is also stocked to meet the screw type for safety standards, refer to your OMRON website. needs. Mounted relay uses plug-in terminals that are difficult to bend when exchanging. Refer to Safety Precautions on page 20. Features Standard model/Micro load With latching lever Push-In Plus Terminal Block (Test switch) Terminal x 5 Short bar insertion holes P ush-in Protective cover Screw (Released state) Release hole Operation Release lever display LED Protective cover Latching lever (Socket section) (Locked condition) (Test switch) Terminal (insertion) hole Latching lever Mechanical (Test switch) indicator Circuit check operation O peration Confirmation, reducing the inspection effort verification which is linked to the contact PATForeign matter intrusion prevention structurMalfunction prevention stoppe Transparent case Relay contact Easy confirmation of the situation Release lever Relay easily fixed/removed 90 mm Plug-in terminal Peace of mind as the terminal does not bend 80 mm when replacing 2