211 228 MOS FET Relays G3VM-21LR1 Worlds Smallest SSOP Package MOS FET Relay* with Low Output Capacitance and ON Resistance (CR = 4pF ) in a 20-V Load Voltage Model ON resistance of 0.8 (typical) suppresses output signal attenuation. RoHS Compliant. *Information correct as of May, 2007, according to data obtained by OMRON. Application Examples Semiconductor inspection tools Measurement devices and Data loggers Note: The actual product is marked differently from the image shown here. Broadband systems List of Models Contact form Terminals Load voltage (peak value) Model Number per tape SPST-NO Surface-mounting 20 VAC G3VM-21LR1 --- terminals G3VM-21LR1(TR) 1,500 G3VM-21LR1(TR05) 500 G3VM-21LR1(TR10) 1,000 Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-21LR1 4.2 1.7 1.4 dia. 3.5 0.15 Note: A tolerance of 0.1 mm applies to 1.8 all dimensions unless otherwise specified. 0.3 0.2 1.27 3.8 Note: The actual product is marked differently Weight: 0.03 g from the image shown here. 2.04 0.2 0.46 Terminal Arrangement/Internal Connections (Top View) G3VM-21LR1 43 12 Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-21LR1 0.95 3.73 0.8 1.27 MOS FET Relays G3VM-21LR1 235 Absolute Maximum Ratings (Ta = 25C) Item Symbol Rating Unit Measurement conditions Input LED forward current I 50 mA Note: 1. The dielectric strength between the input and F output was checked by applying voltage be- Repetitive peak LED I 1 A 100 s pulses, 100 pps tween all pins as a group on the LED side and FP forward current all pins as a group on the light-receiving side. LED forward current I /C 0.5 mA/CT 25C F a reduction rate LED reverse voltage V 5V R Connection temperature T 125 C j Output Load voltage (AC peak/DC) V 20 V OFF Continuous load current I 450 mA O ON current reduction rate I /C 4.5 mA/CT 25C ON a Connection temperature T 125 C j Dielectric strength between input and V 1,500 V AC for 1 min I-O rms output (See note 1.) Operating temperature T 20 to +85 C With no icing or condensation a Storage temperature T 40 to +125 C With no icing or condensation stg Soldering temperature (10 s) --- 260 C 10 s Electrical Characteristics (Ta = 25C) Mini- Maxi- Measurement Item Symbol Typical Unit mum mum conditions Input LED forward voltage V 1.0 1.15 1.3 V I = 10 mA F F Note: 2. Turn-ON and Turn-OFF Times Reverse current I --- --- 10 AV = 5 V R R IF 1 4 RL VDD Capacity between terminals C --- 15 --- pF V = 0, f = 1 MHz T VOUT 2 3 Trigger LED forward current I --- --- 4 mA I = 100 mA FT O Output Maximum resistance with output ON R --- 0.8 1.2 I = 5 mA, ON F I = 450 mA, t = 10 ms O IF Current leakage when the relay is open I --- 0.2 1.0 nA V = 20 V, T = 50C LEAK OFF a Capacity between terminals C --- 5.0 12.0 pF V = 0, f = 100 MHz, 90% OFF VOUT 10% t < 1 s t ON t OFF Capacity between I/O terminals C --- 0.8 --- pF f = 1 MHz, V = 0 V I-O s Insulation resistance R 1,000 --- --- M V = 500 VDC, I-O I-O R 60% oH Turn-ON time t --- 0.2 0.5 ms I = 10 mA, R = 200 , ON F L V = 20 V (See note 2.) DD Turn-OFF time t --- 0.2 0.5 ms OFF Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) V --- --- 20 V DD Operating LED forward current I 10 --- 30 mA F Continuous load current (AC peak/DC) I --- --- 450 mA O Operating temperature T 25 --- 60 C a 236 MOS FET Relays G3VM-21LR1