MOS FET Relays G3VM-2(F)L Analog-switching MOS FET Relays with 350-V Load Voltage and Current Limit. A 4-pin Relay available with the same terminal-pin position as 4-pin photocouplers. Approved standards: UL1577 (File No. E80555) RoHS Compliant. Application Examples Electronic automatic exchange systems Cordless telephones Note: The actual product is marked differently from the image shown here. Multi-functional telephones Measurement devices List of Models Load voltage Number per Number per Contact form Terminals Model Current limit (peak value) stick tape SPST-NO PCB terminals 350 VAC G3VM-2L Yes 100 --- Surface-mounting G3VM-2FL terminals G3VM-2FL(TR) --- 1,500 Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-2L 0.25 G3VM-2FL 4.58 4.580.25 6.40.25 0.25 6.4 0.25 7.62 0.25 7.62 0.80.25 +0.15 3.65 +0.15 +0.25 0.25 3.65 4.0 0.25 0.2 1.0 +0.1 0.25 0.05 min. 0.15 Note: The actual product Note: The actual product 1.2 1.0 min. 1.20.15 is marked different- 2.5 min. is marked different- 10.0 max. 0.50.1 7.85 to 8.80 0.25 ly from the image ly from the image 2.54 shown here. 0.25 shown here. 2.54 Weight: 0.26 g Weight: 0.26 g Terminal Arrangement/Internal Connections (Top View) G3VM-2L G3VM-2FL 43 43 12 12 PCB Dimensions (Bottom View) Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-2L Four 0.8-dia. holes 2.54 G3VM-2FL (0.56) 2.54 2.54 8.3 to 8.8 (0.56) 1.3 (0.1) (0.1) 1.5 MOS FET Relays G3VM-2(F)L 31 Absolute Maximum Ratings (Ta = 25C) Item Symbol Rating Unit Measurement conditions LED forward current I 50 mA F Note: 1. The dielectric strength between the input and output was checked by applying voltage be- Repetitive peak LED forward I 1 A 100 s pulses, 100 pps tween all pins as a group on the LED side and FP current all pins as a group on the light-receiving side. Input LED forward current reduction I /C 0.5 mA/CTa 25C F rate LED reverse voltage V 6V R Connection temperature T 125 C j Load voltage (AC peak/DC) V 350 V OFF Continuous load current I 120 mA O Output ON current reduction rate I /C 1.2 mA/CTa 25C ON Connection temperature T 125 C j Dielectric strength between input and V 2,500 V AC for 1 min I-O rms output (See note 1.) Operating temperature T 40 to +85 C With no icing or condensation a Storage temperature T 55 to +125 C With no icing or condensation stg Soldering temperature (10 s) --- 260 C 10 s Electrical Characteristics (Ta = 25C) Mini- Maxi- Measurement Item Symbol Typical Unit mum mum conditions Input LED forward voltage V 1.0 1.15 1.3 V I = 10 mA Note: 2. Turn-ON and Turn-OFF F F Times Reverse current I --- --- 10 AV = 6 V R R 1 4 Load Capacity between terminals C --- 30 --- pF V = 0, f = 1 MHz T AC/DC 2 3 Trigger LED forward current I --- 1 3 mA I = 120 mA FT O IF 1 4 RL Output Maximum resistance with output ON R --- 22 35 I = 5 mA, VDD ON F I = 120 mA VOUT O 2 3 Current leakage when the relay is open I --- 0.0005 1.0 AV = 350 V LEAK OFF Capacity between terminals C --- 40 --- pF V = 0, f = 1MHz OFF IF Limit current I 150 --- 300 mA I = 5 mA, V = 5 V, LIM F DD t = 5 ms 90% Capacity between I/O terminals C --- 0.8 --- pF f = 1 MHz, V = 0 V VOUT I-O s 10% t ON t OFF Insulation resistance R 1,000 --- --- M V = 500 VDC, I-O I-O R 60% oH Turn-ON time t --- 0.25 1.0 ms I = 5 mA, R = 200 , ON F L V = 20 V (See note 2.) DD Turn-OFF time t --- 0.15 1.0 ms OFF Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) V --- --- 280 V DD Operating LED forward current I 57.5 25 mA F Continuous load current (AC peak/DC) I --- --- 100 mA O Operating temperature T 20 --- 65 C a 32 MOS FET Relays G3VM-2(F)L