NX-series Analog Output Unit NX-DA CSM NX-DA DS E 1 1 Wide Lineup to Meet Various Analog Control Needs: from High-speed Synchronous Control to General Purpose NX-series Analog Output Unit This unit can be used as an ECAT slave by connecting with the ECAT Coupler. Voltage and current output models are available. Features Output up to four analog signals with one Unit. Free-run refreshing or I/O synchronous refreshing can be selected for refreshing with the EtherCAT Coupler Unit. The lineup includes the model which achieves sampling speed of 10 s and resolution of 1/30000, ideal for high-speed, high-precision control. The removable screwless terminal block improves maintenance. Screw-less clamp terminal block significantly reduces wiring work. 12-mm-wide unit can save space. System Configuration Sysmac Studio Support Software EtherCAT master* NJ-series CPU Unit Connection to peripheral USB port or built-in EtherNet/IP port on NJ-series CPU Unit Built-in EtherCAT port EtherCAT Slave Terminal Sysmac Studio Support Software Communications cable NX Series Ethernet cables EtherCAT Coupler Unit NX-ECC201 Peripheral USB port. Connection to peripheral USB port on EtherCAT Coupler Unit End Cover NX Units *OMRON CJ1W-NC 81/ 82 Position Control Units cannot be connected to the EtherCAT Slave Terminal even though they support EtherCAT. Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products. EtherCAT is a registered trademark of Beckhoff Automation GmbH for their patented technology. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies. 1NX-DA Ordering Information International Standards The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, CE: EC Directives,and KC: KC Registration. Contact your OMRON representative for further details and applicable conditions for these standards. Analog Output Unit Specification NX Unit Output setting Unit Product Over all I/O power Model Standards Input value, decimal Conversion type Name Capacity Resolution accuracy refreshing consumption range number time (25C) method (0 to 100%) 0.3% Free-Run 1/8000 -4000 to 4000 250 s/point 1.10W max. NX-DA2603 (full scale) refreshing Voltage Switching 2 points Output Synchronous -15000 to 0.1% Unit 1/30000 10 s/point I/O refreshing 1.10W max. NX-DA2605 15000 (full scale) and Free-Run refreshing -10 to +10V 0.3% Free-Run 1/8000 -4000 to 4000 250 s/point 1.25W max. NX-DA3603 (full scale) refreshing Switching 4 points Synchronous -15000 to 0.1% 1/30000 10 s/point I/O refreshing 1.25W max. NX-DA3605 15000 (full scale) NX and Free-Run Series refreshing Analog UC1,CE,KC 0.3% Free-Run Output 1/8000 0 to 8000 250 s/point 1.75W max. NX-DA2203 (full scale) refreshing Unit Current Switching 2 points Output Synchronous 0.1% Unit 1/30000 0 to 30000 10 s/point I/O refreshing 1.75W max. NX-DA2205 (full scale) and Free-Run refreshing 4 to 20mA 0.3% Free-Run 1/8000 0 to 8000 250 s/point 1.80W max. NX-DA3203 (full scale) refreshing Switching 4 points Synchronous 0.1% 1/30000 0 to 30000 10 s/point I/O refreshing 1.80W max. NX-DA3205 (full scale) and Free-Run refreshing Option Product Name Specification Model Standards For 10 Units Cording Pins NX-AUX02 --- (Terminal Block: 30 pins, Unit: 30 pins) Accessories Not included. 2