Multi-Output Switch Mode Power Supply S82R (30/50/75-W Models) Economical, Easy-to-use Multi-Output Power Supply 30 W, 50 W, and 75 W, two-channel multi-output power supply. Unified depths and mounting dimensions. Three mounting methods, including front mounting. 12-V or 15-V output ideal for operational amplifiers. UL and CSA approved. RoHS-compliant Note: Refer to Safety Precautions on page 8. Model Number Structure Model Number Legend Note: Not all combinations are possible. Please refer to List of Models in Ordering Information, below. S82R- 132 4 1. Input Voltage/Configuration 2. Power Rating 3. Number of Outputs 4. Output Voltage Number Input Configura- Number Power ratings Number Number of outputs Number Output voltage voltage tion 330 W 22 V V 1 2 0 100 VAC Open-frame 550 W 15 V 12 V 2 200 VAC Open-frame 775 W 25 V 24 V 5 100 VAC Covered 712 V 12 V 6 200 VAC Covered 815 V 15V Ordering Information List of Models Note: For details on normal stock models, contact your nearest OMRON representative. Type Capacity Output voltage/current Model V V 100 VAC input type 200 VAC input type 1 2 Open-frame 30 W 5V, 2A 12V, 2A S82R-0321 S82R-2321 type 5V, 2A 24V, 1A S82R-0322 S82R-2322 30 W 12V, 1.7A 12V, 0.8A S82R-0327 S82R-2327 15V, 1A 15V, 1A S82R-0328 S82R-2328 50 W 5V, 3A 12V, 3A S82R-0521 S82R-2521 5V, 2A 24V, 2A S82R-0522 S82R-2522 50 W 12V, 3A 12V, 1.2A S82R-0527 S82R-2527 15V, 1.7A 15V, 1.7A S82R-0528 S82R-2528 75 W 5V, 5A 24V, 2A S82R-0722 S82R-2722 Covered type 30 W 5V, 2A 12V, 2A S82R-5321 S82R-6321 5V, 2A 24V, 1A S82R-5322 S82R-6322 30 W 12V, 1.7A 12V, 0.8A S82R-5327 S82R-6327 15V, 1A 15V, 1A S82R-5328 S82R-6328 50 W 5V, 3A 12V, 3A S82R-5521 S82R-6521 5V, 2A 24V, 2A S82R-5522 S82R-6522 50 W 12V, 3A 12V, 1.2A S82R-5527 S82R-6527 15V, 1.7A 15V, 1.7A S82R-5528 S82R-6528 75 W 5V, 5A 24V, 2A S82R-5722 S82R-6722 S82R Specifications Characteristics Input 100 V input 200 V input Power rating 30 W 50 W 75 W 30 W 50 W 75 W Efficiency (typ.) 68% min. (depending on model) Input Voltage AC 85 to 132 V 170 to 264 V (See note 1.) DC 110 to 170 V (See note 2.) Not available Frequency (See note 1.) 50/60 Hz (47 to 450 Hz) Current (See note 3.) 1.1 A max. 1.4 A max. 2 A max. 0.7 A max. 0.8 A max. 1.1 A max. Leakage current 0.5 mA max. 1 mA max. (See note 3.) Inrush current (See note 3.) 30 A max. (for a cold start at 25C) 60 A max. (for a cold start at 25C) Noise filter Yes Output Voltage accuracy V : 3.5% max. V : 5% max. (with input, load, and temperature within permissible fluctuation ranges) 1 2 Voltage adjustment range Fixed except for 5-V output which can be adjusted by 5% (with V. ADJ) (See note 4.) Ripple (See note 3.) 2% (p-p) max. Input variation influence 0.4% max. (at 85 to 132 V input, 100% load) 0.4% max. (at 170 to 264 V input, 100% load) Load variation influence V : 0.8% max. (at rated input, 10% to 100% load) V : 2% max. 1 2 Temperature variation 0.05%/C max. (at rated input/output) influence Startup time 200 ms max. (Up to 90% of output voltage at rated input and output) Hold up time (See note 3.) 20 ms min. Ancillary Overload protection 105% min. of rated current, voltage drop, automatic reset function (See note 5.) Overvoltage protection No Others Operating temperature Refer to the derating curve in Engineering Data (with no icing or condensation). Storage temperature 25C to 65C Operating humidity 25% to 85% (storage humidity: 20% to 90%) Dielectric strength 2.0 kVAC, 50/60 Hz, for 1 minute (between input terminals and output terminals/PE terminal) Insulation resistance 100 M min. (between output terminals and input terminals/PE terminal at 500 VDC) Vibration resistance 10 to 55 Hz, 0.75 mm single amplitude for 2 hours each in X, Y, and Z directions 2 Shock resistance 294 m/s , 3 times each in X, Y, Z directions Output indicator V1 output indicator only (color: red) Approved UL UL1012 standards CSA E.B.1402C Weight (See note 6.) 400 g max. 500 g max. 550 g max. 400 g max. 500 g max. 550 g max. Note: 1. Do not use an inverter output for the Power Supply. Inverters with an output frequency of 50/60 Hz are available, but the rise in the internal temperature of the Power Supply may result in ignition or burning. 2. These Power Supplies do not comply with safety standards if a DC power supply is used. 3. Defined with a 100% load at the rated input voltage (100 or 200 VAC). 4. If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than 5% of the voltage adjustment range. When adjusting the output voltage, confirm the actual output voltage from the Power Supply and be sure that the load is not damaged. 5. Refer to Overload Protection on page 4 for details. 6. Weights are given for the covered type.