Ordering number : ENN647D
DBA20
Diffused Junction Type Silicon Diode
DBA20
2.0A Single-Phase Bridge Rectifier
Features Package Dimensions
Plastic molded structure.
unit : mm
Glass passivation for high reliability. 1087
Peak reverse voltage : V =200, 600V.
RM
[DBA20]
Average rectified current : I =2.0A.
O
7.0 20.0 min 12.5
7.5
3.2
Specifications
Absolute Maximum Ratings at Ta=25C
Parameter Symbol Conditions DBA20C DBA20G Unit
Peak Reverse Voltage V 200 600 V
RM
Average Recitified Current I Ta=40C 2.0 A
O
Surge Forward Current I 50Hz sine wave, 1cycle 40 A
FSM
Junction Temperature Tj 150 C
Storage Temperature Tstg --30 to +150 C
Electrical Characteristics at Ta=25C
Ratings
Parameter Symbol Conditions Unit
min typ max
Forward Voltage V I =1.0A 1.05 V
F F
Reverse Current I V : At each V 10 A
R R RM
Note : Mountiong torque : 0.49Nm max.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
41000 GI IM / 52098 HA (KT) / 1129 YT, TS No.647-1/2
12.5
1.2
12.5
7.510mm
50Hz
L=15mm
1.5mm
5mm
DBA20
I -- Ta I -- V
O F F
2.4 10
7
Resistive, inductive load
5
2.0
L
L=20mm
Capacitive
3
load
15mm
1.6
2
5mm
1.2 1.0
L=20mm
7
15mm
5
0.8
5mm
3
0.4
2
0 0.1
0 20 40 60 80 100 120 140 160 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Ambient Temperature, Ta -- C ID01171 Forward Voltage, V -- V ID01172
F
I -- n Soldering Temperature -- t
FSM
50 5
4
40
3
30
2
20
10
L
0 100
2537 2537 2537 2
1.0 10 100 1.0 10
Number of Cycles at 50Hz, n ID01173 Solder Dip Time, t -- s ID01174
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customers
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customers products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to theDelivery Specificatio
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of April, 2000. Specifications and information herein are subject to
change without notice.
PS No.647-2/2
Ta=150C
25C
Surge Foward Current, I -- A Average Rectified Current, I -- A
FSM O
Forward Current, I -- A
Solder Temperature -- C
F