ESD8118 ESD Protection Diode Low Capacitance Array for High Speed Data Lines The ESD8118 surge protection is specifically designed to protect www.onsemi.com four high speed data pairs from ESD. Ultralow capacitance and low ESD clamping voltage make this device an ideal solution for MARKING protecting voltage sensitive high speed data lines. The flowthrough DIAGRAM style package allows for easy PCB layout and matched trace lengths necessary to maintain consistent impedance between high speed ACM differential lines. UDFN10 CASE 517CY Features Low Capacitance (0.35 pF Max, I/O to GND) Protection for the Following IEC Standards: PIN CONFIGURATION IEC 6100042 (Level 4) I/O I/O I/O I/O Low ESD Clamping Voltage 10 9 8 7 These Devices are PbFree, Halogen Free/BFR Free and are RoHS Compliant Typical Applications 12 3 4 5 6 HDMI 1.3/1.4/2.0 I/O GND I/O I/O GND I/O Display Port MAXIMUM RATINGS (T = 25C unless otherwise noted) J ORDERING INFORMATION Rating Symbol Value Unit Device Package Shipping Operating Junction Temperature Range T 55 to +125 C J ESD8118MUTAG UDFN10 3000 / Tape & Reel Storage Temperature Range T 55 to +150 C (PbFree) stg Lead Solder Temperature T 260 C L For information on tape and reel specifications, Maximum (10 Seconds) including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification IEC 6100042 Contact (ESD) ESD 15 kV Brochure, BRD8011/D. IEC 6100042 Air (ESD) ESD 15 kV Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. See Application Note AND8308/D for further description of survivability specs. Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: November, 2017 Rev. 1 ESD8118/DESD8118 I/O I/O I/O I/O I/O I/O I/O I/O Pin 1 Pin 3 Pin 4 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 Pin 2 Note: Common GND Only Minimum of 1 GND connection required = Figure 1. Pin Schematic www.onsemi.com 2