Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductors system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore ( ), the underscore ( ) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore ( ). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild questions onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductors product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. Typical parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.FSL337LR Green Mode Fairchild Buck Switch August 2016 FSL337LR Green Mode Fairchild Buck Switch Features Description Built-in Avalanche-Rugged SenseFET: 700 V The FSL337LR integrated Pulse Width Modulator (PWM) and SenseFET is specifically designed for high- Fixed Operating Frequency: 50 kHz performance offline buck, buck-boost, and non-isolation No-Load Power Consumption: flyback Switched Mode Power Supplies (SMPS) with <25 mW at 230 V with External Bias AC minimal external components. This device integrates a <120 mW at 230 V without External Bias high-voltage power regulator that enables operation AC without auxiliary bias winding. An internal No Need for Auxiliary Bias Winding transconductance amplifier reduces external Frequency Modulation for Attenuating EMI components for the feedback compensation circuit. Pulse-by-Pulse Current Limiting The integrated PWM controller includes: 10 V regulator for no external bias circuit, Under-Voltage Lockout Ultra-Low Operating Current: 250 A (UVLO), Leading-Edge Blanking (LEB), an optimized Built-in Soft-Start and Startup Circuit gate turn-on / turn-off driver, EMI attenuator, Thermal Shutdown (TSD), temperature-compensated precision Adjustable Peak Current Limit current sources for loop compensation, and fault- Built-in Transconductance (Error) Amplifier protection circuitry. Protections include: Overload Protection (OLP), Over-Voltage Protection (OVP), and Various Protections: Overload Protection (OLP), Feedback Open Loop Protection (FB OLP). FSL337LR Over-Voltage Protection (OVP), Feedback offers good soft-start performance during startup. Open-Loop Protection (FB OLP), Thermal Shutdown (TSD) The internal high-voltage startup switch and the Burst- Mode operation with very low operating current reduce Fixed 650 ms Restart Time for Safe Auto-Restart the power loss in Standby Mode. As the result, it is of All Protections possible to reach power loss of 120 mW without external bias and 25 mW with external bias when input Applications voltage is 230 V . AC SMPS for Home Appliances and Industrial Applications SMPS for Auxiliary Power E-meter Power Supply Ordering Information (1) Typical Output Power Operating 85 V ~ 265 V AC AC Part Packing (2) Junction PKG & Open Frame Current Number Method R DS(ON),MAX Temperature Limit Buck Flyback (1) Application Application FSL337LRN -40C ~125C 7-DIP Rail 1.8 A 4 9 W 20 W Notes: 1. The junction temperature can limit the maximum output power. 2. Maximum practical continuous power in an open-frame design at 50C ambient. 3. Based on 15 V output voltage condition. Output voltage can limit the maximum output power. 2016 Fairchild Semiconductor Corporation www.fairchildsemi.com FSL337LR Rev.1.0