FUSB301 Autonomous USB Type-C Controller with Super Speed Switch Control Description www.onsemi.com The FUSB301 is a fully autonomous Type-C controller optimized for <15 W applications. The FUSB301 offers CC logic detection for Source Mode, Sink Mode, Dual Role Port Mode, accessory detection support, and dead battery support. The FUSB301 features an external switch pin (SS SW) to enable an external USB Super Speed Switch without interrupting the processor. The FUSB301 features an Bottom View extremely low power disable mode as well as low power during X2QFN10 1.6x1.2, 0.4P normal operation. It is available in an ultra thin, 10-Lead TMLP CASE 722AC package. Features ORDERING INFORMATION Fully Autonomous TypeC Controller See detailed ordering and shipping information on page 2 of this data sheet. Supports TypeC Versions 1.1 and 1.0 V Operating Range, 3.0 V 5.5 V DD Low Disable Power: I = 2 A (Max.) CC Low Standby Power: I = 7 A (Max.) CC Dual Role Port Mode with Optional Accessory Support Capable of Supporting Try.SNK and Try.SRC Super Speed Switch Control Dead Battery Support (SINK Support when No Power Applied) 2 kV HBM ESD Protection Small Packaging, 10 Lead TMLP (1.6 mm 1.2 mm 0.375 mm) Applications Smartphones Notebooks Tablets Ultra Portable Applications Figure 1. Typical Application Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: June, 2018 Rev. 0 FUSB301/DFUSB301 ORDERING INFORMATION Operating Temperature Range Part Number Top Mark Package Packing Method 10Lead Ultrathin Molded Leadless Package (TMLP) FUSB301TMX NU 40 to 85C Tape and Reel 1.6 mm 1.2 mm 0.375 mm For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. BLOCK DIAGRAM Figure 2. Block Diagram PIN CONFIGURATION Figure 3. Pin Assignment (Top Through View) www.onsemi.com 2