KAF-6303 3072 (H) x 2048 (V) Full Frame CCD Image Sensor Description The KAF6303 Image Sensor is a high performance CCD (charge-coupled device) with 3072 (H) 2048 (V) photo active pixels www.onsemi.com designed for a wide range of image sensing applications. The sensor incorporates true two-phase CCD technology, simplifying the support circuits required to drive the sensor as well as reducing dark current without compromising charge capacity. The sensor also utilizes the TRUESENSE Transparent Gate Electrode to improve sensitivity compared to the use of a standard front side illuminated polysilicon electrode. Table 1. GENERAL SPECIFICATIONS Parameter Typical Value Architecture Full Frame CCD Total Number of Pixels 3088 (H) 2056 (V) Figure 1. KAF6303 Full Frame CCD Number of Active Pixels 3072 (H) 2048 (V) = approx. 6.3 Mp Image Sensor Pixel Size 9 m (H) 9 m (V) Features Active Image Size 27.65 mm (H) 18.48 mm (V) 33.4 mm (Diagonal) True Two Phase Full Frame Architecture APSH Optical Format TRUESENSE Transparent Gate Electrode Chip Size 29.0 mm (H) 19.1 mm (V) for High Sensitivity Saturation Signal 100,000 e 100% Fill Factor Output Sensitivity 10 V/e Low Dark Current Quantum Efficiency 40%, 52%, 65% (450, 550, 650 mm) Applications Readout Noise (10 MHz) 15 e rms Medical Imaging 2 Dark Current < 10 pA/cm Scientific Imaging (Accumulation Mode) Dark Current Doubling Rate 6C ORDERING INFORMATION Dynamic Range 76 dB See detailed ordering and shipping information on page 2 of (Saturation Signal/Dark Noise) this data sheet. Maximum Date Rate 10 MHz Package CERDIP Package (Sidebrazed) Cover Glass Clear or AR Coated, 2 Sides NOTE: Parameters above are specified at T = 25C unless otherwise noted. Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: April, 2015 Rev. 2 KAF6303/DKAF6303 ORDERING INFORMATION Table 2. ORDERING INFORMATION KAF6303 IMAGE SENSOR Part Number Description Marking Code KAF6303AAACDB2 Monochrome, No Microlens, CERDIP Package (Sidebrazed), Clear Cover Glass with AR Coating (Both Sides), Grade 2 KAF6303AAACDAE Monochrome, No Microlens, CERDIP Package (Sidebrazed), Clear Cover Glass with AR Coating (Both Sides), Engineering Sample KAF6303AAA Serial Number KAF6303AAACPB2 Monochrome, No Microlens, CERDIP Package (Sidebrazed), Taped Clear Cover Glass (No Coatings), Grade 2 KAF6303AAACPAE Monochrome, No Microlens, CERDIP Package (Sidebrazed), Taped Clear Cover Glass (No Coatings), Engineering Sample Table 3. ORDERING INFORMATION EVALUATION SUPPORT Part Number Description KAF6303125AEVK Evaluation Board (Complete Kit) See the ON Semiconductor Device Nomenclature document (TND310/D) for a full description of the naming convention used for image sensors. For reference documentation, including information on evaluation kits, please visit our web site at www.onsemi.com. www.onsemi.com 2