LB11961RM-TLM3-E ON Semiconductor

Ordering number : EN8793B LB11961 Monolithic Digital IC Single-Phase Full-Wave LB11961 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Symbol Conditions Ratings Unit V maximum output voltage Vmax 18 V CC CC OUT pin maximum output I max OUT 1.0 A current OUT pin output voltage V max 18 V OUT HB maximum output current IHBmax 10 mA VTH input pin voltage VTHmax 6 V RD/FG output pin output voltage VRD/FGmax 18 V RD/FG output current IRD/FGmax 10 mA Allowable power dissipation Pd max When mounted on a circuit board *1 W 1.1 Operating temperature Topr C -30 to +90 Storage temperature Tstg C -55 to +150 3 *1 Specified circuit board : 114.3 76.1 1.6mm , glass epoxy. Caution 1) Absolute maximum ratings represent the value which cannot be exceeded for any length of time. Caution 2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high temperature, high current, high voltage, or drastic temperature change, the reliability of the IC may be degraded. Please contact us for the further details. Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Recommended Operating Conditions at Ta = 25C Parameter Symbol Conditions Ratings Unit V supply voltage V V 4.5 to 16 CC CC VTH input level voltage range VTH V 0 to 9 Hall sensor input common-mode VICM 0.2 to 3 V input voltage range Electrical Characteristics Unless otherwise specified Ta = 25C, V = 12V CC Ratings Parameter Symbol Conditions Unit min typ max Circuit current I1 Drive mode 12 18 24 mA CC I 2 Lock protection mode 8 11 16 mA CC 6VREG voltage V6VREG I6VREG = 5mA 5.8 6 6.2 V HB voltage VHB IHB = 5mA 1.10 1.25 1.40 V CPWM high-level voltage VCRH 3.45 3.6 3.75 V CPWM low-level voltage VCRL 1.95 2.05 2.15 V CPWM oscillator frequency FPWM C = 100pF 18 25 32 kHz CT pin high-level voltage VCTH 3.45 3.6 3.75 V CT pin low-level voltage VCTL 1.55 1.7 1.85 V ICT charge current ICT1 1.5 2 2.5 A ICT discharge current ICT2 0.15 0.2 0.25 A ICT charge/discharge current RCT 8.5 10 11.5 ratio OUT output low saturation V I = 200mA 0.2 0.3 V OL O voltage OUT output high saturation V I = 200mA 0.9 1.1 V OH O voltage Hall sensor input sensitivity VHN Zero peak value (including offset and 10 20 mV hysteresis) RD/FG output pin low-level VRDL/FGL IRD/FG = 5mA 0.2 0.3 V voltage RD/FG output pin leakage IRDL/FGL VRD/FG = 7V 30 A current No.8793-2/7