LV8161MUTAG ON Semiconductor

Ordering number : ENA2311 LV8161MU Monolithic Linear IC LV8161MU Recommended Operating Conditions at Ta = 25C Ratings Parameter Symbol Conditions Unit min typ max Recommended Supply voltage V 5.0 V CC Operating supply voltage Vop 2.2 6.0 V CC Hall amplifier common mode V 0.3 1.5V ICM input voltage range Feedback resistance R Resistance between COUT pin and CIN pin 5 k COUT CIN input frequency range f 10 400kHz CIN Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. Electrical Characteristics at Ta = 25C, V = 5V CC Ratings Parameter Symbol Conditions Unit min typ max Circuit current I 1.8 2.7mA CC HB bias voltage VHB IHB=-5mA 0.90 1.03 1.20 V OUT1/2 output H voltage VOH IOUT=-200mA (VOH=VCC-VOUT) 0.16 0.24 V OUT1/2 output L voltage VOL IOUT=200mA 0.10 0.15 V Hall amplifier VINOFS -10 10mV output offset voltage Hall amplifier voltage gain GH 44.0 45.5 47.0 dB Hall comparator hysteresis width VHIN *1 15 mV CIN input H threshold level VCINH 2.365 2.490 2.615 V CIN input L threshold level VCINL 1.190 1.255 1.320 V CIN input hysteresis width VCIN 1.175 1.235 1.295 V COUT output H voltage VCOH ICOH=-0.5mA (VCOH=VCC-VCOUT) 60 80 100 mV COUT output L voltage VCOL ICOL=0.5mA 60 80 100 mV Number of counts at speed N1 990 detection 1 Number of counts at speed N2 1010 detection 2 PWM frequency fPWM 22 32 42 kHz PWM minimum H duty DHmin 16 20 24 % FG output L voltage VFGL IFG=3mA 0.3 V FG output leakage current IFGL VFG=7V 10 A Output on time in lock-detection LT1 0.4 0.6 0.8 s Output off time in lock-detection LT2 4 6 8 s Output on/off time ratio LRTO LRTO=LT2/LT1 9 10 11 In lock detection Thermal-shutdown operating TSD *1 180 C temperature Thermal-shutdown TSD *1 30 C hysteresis width Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. No.A2311-2/11