MBRB4030G ON Semiconductor

MBRB4030G, NRVBB4030T4G Preferred Device Switch-mode Power Rectifier These stateoftheart devices use the Schottky Barrier principle with a proprietary barrier metal. MBRB4030G, NRVBB4030T4G MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage V 30 V RRM Working Peak Reverse Voltage V RWM DC Blocking Voltage V R Average Rectified Forward Current I A F(AV) (At Rated V ) T = +115C (Note 1) 40 R C Peak Repetitive Forward Current I A FRM (At Rated V , Square Wave, 20 kHz), T = +112C 80 R C NonRepetitive Peak Surge Current I A FSM (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) 300 I 2.0 A Peak Repetitive Reverse Surge Current (2.0 s, 1.0 kHz) RRM Storage Temperature Range T 65 to +175 C stg Operating Junction Temperature Range (Note 2) T 65 to +175 C J Voltage Rate of Change (Rated V ) dv/dt 10,000 V/ s R Reverse Energy (Unclamped Inductive Surge), (T = 25C, L = 3.0 mH) W 600 mJ C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Rating applies when pins 1 and 3 are connected. 2. The heat generated must be less than the thermal conductivity from JunctiontoAmbient: dP /dT < 1/R . D J JA THERMAL CHARACTERISTICS Characteristic Symbol Value Unit Thermal Resistance, JunctiontoCase R 1.0 C/W JC Thermal Resistance, JunctiontoAmbient (Note 3) R 50 C/W JA 3. Rating applies when surface mounted on the miniumum pad size recommended. ELECTRICAL CHARACTERISTICS Characteristic Symbol Value Unit Maximum Instantaneous Forward Voltage (Notes 4 and 5), per Device V V F (I = 20 A, T = + 25C) 0.46 F C (I = 20 A, T = +150C) 0.34 F C (I = 40 A, T = + 25C) 0.55 F C (I = 40 A, T = +150C) 0.45 F C Maximum Instantaneous Reverse Current (Note 5), per Device I mA R (Rated DC Voltage, T = + 25C) 0.35 C (Rated DC Voltage, T = +125C) 150 C 4. Rating applies when pins 1 and 3 are connected. 5. Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0% ORDERING INFORMATION Device Package Shipping 2 MBRB4030G D PAK 50 Units / Rail (Pb Free) 2 MBRB4030T4G D PAK 800 Units / Tape & Reel (Pb Free) 2 NRVBB4030T4G D PAK 800 Units / Tape & Reel (Pb Free) For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.