MC10H104
Quad 2Input AND Gate
Description
The MC10H104 is a quad 2-input AND gate. One of the gates has
both AND/NAND outputs available. This MECL 10H part is a
functional/pinout duplication of the standard MECL 10K family
www.onsemi.com
part, with 100% improvement in propagation delay, and no increase in
power supply current.
Features
Propagation Delay, 1.0 ns Typical
16
Power Dissipation 25 mW/Gate (same as MECL 10K)
20
1
1
Improved Noise Margin 150 mV (Over Operating Voltage and
Temperature Range) PDIP16 PLLC20
P SUFFIX FN SUFFIX
Voltage Compensated
CASE 64808 CASE 77502
MECL 10K Compatible
These Devices are Pb-Free, Halogen Free and are RoHS Compliant
MARKING DIAGRAMS*
120
16
MC10H104P
AWLYYWWG 10H104G
AWLYYWW
1
A = Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
G = Pb-Free Package
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
Device Package Shipping
MC10H104FNG PLCC20 46 Units/Tube
(Pb-Free)
MC10H104FNR2G PLCC20 500/Tape & Reel
(Pb-Free)
MC10H104PG PDIP-16 25 Units/Tube
(Pb-Free)
For information on tape and reel specifications, in-
cluding part orientation and tape sizes, please refer
to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Semiconductor Components Industries, LLC, 2016
1 Publication Order Number:
August, 2016 Rev. 9 MC10H104/DMC10H104
V V
1 16
CC1 CC2
4
2
A 2 15 D
out out
5
B C
3 14
out out
6
3
7
A D
4 13
in in
10
D
A 5 12
in in
14
11
B C
6 11 in
in
12 9
B C
13 15 7 10
in in
V = Pin 1
CC1
V D
8 9
EE out
V = Pin 16
CC2
V = Pin 8
EE
Pin assignment is for Dual-in-Line Package.
Figure 1. Logic Diagram Figure 2. Pin Assignment
Table 1. MAXIMUM RATINGS
Symbol Characteristic Rating Unit
V Power Supply (V = 0) 8.0 to 0 Vdc
EE CC
V Input Voltage (V = 0) 0 to V Vdc
I CC EE
I Output Current mA
out
Continuous 50
Surge 100
T Operating Temperature Range 0 to +75 C
A
T Storage Temperature Range C
stg
Plastic 55 to +150
Ceramic 55 to +165
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
Table 2. ELECTRICAL CHARACTERISTICS (V = 5.2 V 5%) (Note 1)
EE
0 25 75
Symbol Characteristic Min Max Min Max Min Max Unit
I Power Supply Current 39 35 39 mA
E
I Input Current High 425 265 265 A
inH
I Input Current Low 0.5 0.5 0.3 A
inL
V High Output Voltage 1.02 0.84 0.98 0.81 0.92 0.735 Vdc
OH
V Low Output Voltage 1.95 1.63 1.95 1.63 1.95 1.60 Vdc
OL
V High Input Voltage 1.17 0.84 1.13 0.81 1.07 0.735 Vdc
IH
V Low Input Voltage 1.95 1.48 1.95 1.48 1.95 1.45 Vdc
IL
1. Each MECL 10H series circuit has been designed to meet the dc specifications shown in the test table, after thermal equilibrium has been
established. The circuit is in a test socket or mounted on a printed circuit board and transverse air flow greater than 500 lfpm is maintained.
Outputs are terminated through a 50 resistor to 2.0 V.
www.onsemi.com
2