MT9F002: 1/2.3-Inch 14 Mp CMOS Digital Image Sensor Features 1/2.3-Inch 14 Mp CMOS Digital Image Sensor MT9F002 Data Sheet, Rev. 9 For the latest data sheet, please visit: www.onsemi.com Table 1: Key Performance Parameters Features Parameter Value 1.4 m pixel with ON Semiconductor A-Pix Optical format 1/2.3-inch (4:3) technology 4608H x 3288V: (entire array): 6.451mm (H) Simple two-wire serial interface x 4.603mm (V), 7.925mm diagonal Auto black level calibration 4384H x 3288V (4:3, still mode): 6.138mm Full HD support at 60 fps for maximum video (H) x 4.603mm (V), 7.672mm diagonal Active pixels and imager size 4608H x 2592V (16:9, video mode): performance 6.451mm (H) x 3.629mm (V), 7.402mm diagonal 20 percent extra image array area in full HD to Pixel size 1.4 m x 1.4m enable electronic image stabilization (EIS). Chief ray angle 0, 11.4, and 25 Support for external mechanical shutter Color filter array RGB Bayer pattern Support for external LED or xenon flash Electronic rolling shutter (ERS) with global reset Shutter type release (GRR) High frame rate preview mode with arbitrary down- Input clock frequency 264 MHz size scaling from maximum resolution Maxi- Parallel 96 Mp/s at 96 MHz PIXCLK Programmable controls: gain, horizontal and vertical mum blanking, frame size/rate, exposure, leftright and data HiSPi (4-lane) 700 Mbps/lane rate topbottom image reversal, window size, and 14M resolution Programmable up to 13.7 fps for HiSPi I/F, 6.3 fps panning (4384H x 3288V) for parallel I/F Data interfaces: parallel or four-lane serial high- 30 fps with binning Preview VGA mode speed pixel interface (HiSPi) differential signaling 60 fps with skip2bin2 Frame 60 fps using HiSPi interface (SLVS) rate 2304H x 1296V (1080p +20%EIS) 1080p mode: On-chip phase-locked loop (PLL) oscillator 30 fps using parallel interface Bayer pattern downsize scaler 2256H x 1268V (1080p +17%EIS) ADC resolution 12-bit, on-chip Responsivity 0.724 V/lux-sec (550nm) Dynamic range 65.3 dB Applications SNR 35.5 dB MAX Digital video cameras 1.71.9 V (1.8 V nominal) I/O Digital or 2.43.1 V (2.8 V nominal) Digital still cameras Digital 1.71.9 V (1.8 V nominal) Supply Analog 2.73.1 V (2.8 V nominal) voltage HiSPi PHY 1.71.9 V (1.8 V nominal) General Description HiSPi I/O (SLVS) 0.3 - 0.9 V (0.4 or 0.8 V nominal) HiSPi I/O (HiVCM) 1.71.9 V (1.8 V nominal) The ON Semiconductor MT9F002 is a 1/2.3-inch Full resolution 13.65 CMOS active-pixel digital imaging sensor with an fps (HiSPi serial I/F, 724 mW Power 12-bit) active pixel array of 4608H x 3288V (4640H x 3320V Con- 1080p60 (HiSPi serial sump- XYbin2: 596 mW including border pixels). It can support 14-megapixel I/F, 10-bit) tion (4384H x 3288V) digital still images and a 1080p plus 1080p30 (HiSPi serial XYbin2: 443 mW I/F, 10-bit) additional 20 percent pixels for electronic image stabi- Package 48-pin iLCC (10 mm x 10 mm) and bare die lization (4608H x 2592V) in digital video mode. The Operating temperature 30C to +70C (at junction) MT9F002 sensor is programmable through a simple two-wire serial interface, and has low power consump- tion. MT9F002/D Rev. 9, 1/16 EN 1 Semiconductor Components Industries, LLC 2016, MT9F002: 1/2.3-Inch 14 Mp CMOS Digital Image Sensor Ordering Information Ordering Information Table 2: Available Part Numbers Part Number Product Description Orderable Product Attribute Description MT9F002I12STCV-DP RGB, 0deg CRA, HiSPi, iLCC Package Drypack, Protective Film MT9F002I12-N4000-DP1 RGB, 12deg CRA, HiSPi, iLCC Package Drypack, Protective Film MT9F002I12STCVD3-GEVK 0deg CRA, HiSPi, Demo Kit MT9F002I12STCVH-GEVB 0deg CRA, HiSPi, Head Board MT9F002I12-N4000D-GEVK 12deg CRA, HiSPi, Demo Kit MT9F002I12-N4000H-GEVB 12deg CRA, HiSPi, Head Board MT9F002/D Rev. 9, 1/16 EN 2 Semiconductor Components Industries, LLC,2016.