ON Semiconductor Is Now To learn more about onsemi, please visit our website at www.onsemi.com onsemi andand other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba onsemi or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided as-is and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. Typical parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and holdo nsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. MT9F002 1/2.3inch 14 Mp CMOS Digital Image Sensor Table 1. KEY PERFORMANCE PARAMETERS Parameter Value www.onsemi.com Optical format 1/2.3inch (4:3) Active pixels and imager size 4608 H x 3288 V: (entire array): 6.451 mm ORDERING INFORMATION (H) x 4.603mm (V), 7.925mm diagonal See detailed ordering and shipping information on page 2 of 4384 H x 3288 V (4:3, still mode): 6.138 mm this data sheet. (H) x 4.603 mm (V), 7.672 mm diagonal 4608 H x 2592 V (16:9, video mode): Features 6.451 mm (H) x 3.629 mm (V), 7.402 mm diagonal 1.4 m Pixel with ON Semiconductor APix Technology Pixel size 1.4 m x 1.4 m Simple Twowire Serial Interface Chief ray angle 0, 11.4, and 25 Auto Black Level Calibration Color filter array RGB Bayer pattern Full HD Support at 60 fps for Maximum Shutter type Electronic rolling shutter (ERS) with global reset release (GRR) Video Performance Input clock frequency 264 MHz 20 percent Extra Image Array Area in Full HD to Enable Electronic Image Stabilization Maximum Parallel 96 Mp/s at 96 MHz PIXCLK data rate (EIS) HiSPi (4lane) 700 Mbps/lane Support for External Mechanical Shutter Frame 14M resolution Programmable up to 13.7 fps for HiSPi I/F, rate (4384H x 3288V) 6.3 fps for parallel I/F Support for External LED or Xenon Flash High Frame Rate Preview Mode with Preview VGA 30 fps with binning mode 60 fps with skip2bin2 Arbitrary Downsize Scaling from Maximum Resolution 1080p mode: 60 fps using HiSPi interface 2304 H x 1296 V (1080p +20%EIS) Programmable Controls: Gain, Horizontal 30 fps using parallel interface and Vertical Blanking, Frame Size/Rate, 2256 H x 1268 V (1080p +17%EIS) Exposure, Leftright and Topbottom Image ADC resolution 12bit, onchip Reversal, Window Size, and Panning Responsivity 0.724 V/luxsec (550 nm) Data Interfaces: Parallel or Fourlane Serial Dynamic range 65.3 dB Highspeed Pixel Interface (HiSPi ) SNR 35.5 dB Differential Signaling (SLVS) MAX Onchip Phaselocked Loop (PLL) Supply I/O Digital 1.71.9 V (1.8 V nominal) voltage or 2.43.1 V (2.8 V nominal) Oscillator Bayer Pattern Downsize Scaler Digital 1.71.9 V (1.8 V nominal) Analog 2.73.1 V (2.8 V nominal) *Parallel interface does not work for MT9F002 package parts HiSPi PHY 1.71.9 V (1.8 V nominal) HiSPi I/O (SLVS) 0.3 0.9 V (0.4 or 0.8 V nominal) Applications HiSPi I/O 1.71.9 V (1.8 V nominal) Digital Video Cameras (HiVCM) Digital Still Cameras Power Full resolution 724 mW Consumpti 13.65 fps (HiSPi on serial I/F, 12bit) General Description The ON Semiconductor MT9F002 is a 1080p60 (HiSPi XYbin2: 596 mW serial I/F, 10bit) 1/2.3inch CMOS activepixel digital imaging 1080p30 (HiSPi XYbin2: 443 mW sensor with an active pixel array of 4608 H serial I/F, 10bit) 3288 V (4640 H 3320 V including border pix- Package 48pin iLCC (10 mm x 10 mm) and bare die els). It can support 14megapixel (4384 H 3288 V) digital still images and a 1080p plus ad- Operating temperature 30C to +70C (at junction) ditional 20 percent pixels for electronic image Semiconductor Components Industries, LLC, 2010 1 Publication Order Number: September, 2017 Rev. 11 MT9F002/D