NCP715SQT2GEVB ON Semiconductor

NCP715 Linear Voltage Regulator - Ultra-Low Iq, Wide Input Voltage, Low Dropout 50 mA www.onsemi.com The NCP715 is 50 mA LDO Linear Voltage Regulator. It is a very stable and accurate device with ultralow ground current consumption (4.7 A over the full output load range) and a wide input voltage range MARKING (up to 24 V). The regulator incorporates several protection features DIAGRAMS such as Thermal Shutdown and Current Limiting. XX M Features XDFN6 Operating Input Voltage Range: 2.5 V to 24 V 1 CASE 711AE Fixed Voltage Options Available: 1.2 V to 5.3 V Ultra Low Quiescent Current: Max. 4.7 A Over Full Load and Temperature 2% Accuracy Over Full Load, Line and Temperature Variations XX M SC705 PSRR: 52 dB at 100 kHz (SC88A) CASE 419A Noise: 190 V from 200 Hz to 100 kHz RMS Thermal Shutdown and Current Limit protection Available in XDFN6 1.5 x 1.5 mm, SC70 (SC88A) and TSOP5 5 Packages 5 1 These are PbFree Devices XXX M TSOP5 Typical Applications CASE 483 1 Portable Equipment XX = Specific Device Code Communication Systems M = Date Code = PbFree Package 1.2 V < V < 5.3 V out 2.5 V < V < 24 V out (Note: Microdot may be in either location) OUT IN NCP715 1 F 1 F ORDERING INFORMATION See detailed ordering and shipping information in the package Ceramic Ceramic NC dimensions section on page 19 of this data sheet. NC GND Figure 1. Typical Application Schematic Semiconductor Components Industries, LLC, 2016 1 Publication Order Number: October, 2019 Rev. 6 NCP715/DNCP715 IN THERMAL UVLO SHUTDOWN BANDGAP MOSFET REFERENCE DRIVER WITH CURRENT LIMIT OUT EEPROM GND Figure 2. Simplified Block Diagram Figure 3. Pin Description PIN FUNCTION DESCRIPTION Pin No. SC70 XDFN6 TSOP5 Pin Name Description 5 6 3 OUT Regulated output voltage pin. A small 0.47 F ceramic capacitor is needed from this pin to ground to assure stability. 1 2 4 N/C No connection. This pin can be tied to ground to improve thermal dissipation or left disconnected. 2 3 1 GND Power supply ground. 3 4 5 N/C No connection. This pin can be tied to ground to improve thermal dissipation or left disconnected. 5 N/C No connection. This pin can be tied to ground to improve thermal dissipation or left disconnected. 4 1 2 IN Input pin. A small capacitor is needed from this pin to ground to assure stability. www.onsemi.com 2