NCV8716MT25TBG ON Semiconductor

NCV8716 Low Dropout Regulator - Ultra-Low Iq, Wide Input Voltage 80 mA www.onsemi.com The NCV8716 is 80 mA LDO Linear Voltage Regulator. It is a very stable and accurate device with ultralow ground current consumption MARKING (4.7 A over the full output load range) and a wide input voltage range DIAGRAMS (up to 24 V). The regulator incorporates several protection features 1 such as Thermal Shutdown and Current Limiting. WDFN6 XX M CASE 511BR Features Operating Input Voltage Range: 2.5 V to 24 V XX = Specific Device Code Fixed Voltage Options Available: M = Date Code 1.5 V to 5.0 V Ultra Low Quiescent Current: Max. 5.8 A over Temperature PIN CONNECTIONS 2% Accuracy over Full Load, Line and Temperature Variations PSRR: 60 dB at 100 kHz 1 6 Noise: 200 V from 200 Hz to 100 kHz RMS 2 5 EXP Thermal Shutdown and Current Limit Protection 3 4 Available in wDFN6, 2x2x0.8 mm Package NCV Prefix for Automotive and Other Applications Requiring WDFN6 2x2 mm Unique Site and Control Change Requirements AECQ100 (Top View) Qualified and PPAP Capable Device Temperature Grade 1: 40C to +125C Ambient Operating Temperature Range These Devices are PbFree, Halogen Free/BFR Free and are RoHS ORDERING INFORMATION See detailed ordering, marking and shipping information on Compliant page 17 of this data sheet. Typical Applications Portable Equipment Communication Systems Figure 1. Typical Application Schematic Semiconductor Components Industries, LLC, 2016 1 Publication Order Number: October, 2019 Rev. 6 NCV8716/DNCV8716 IN THERMAL UVLO SHUTDOWN BANDGAP MOSFET REFERENCE DRIVER WITH CURRENT LIMIT OUT EEPROM GND Figure 2. Simplified Block Diagram Table 1. PIN FUNCTION DESCRIPTION Pin Name Pin No. Description 6 OUT Regulated output voltage pin. A small 0.47 F ceramic capacitor is needed from this pin to ground to assure stability. 2 N/C No connection. This pin can be tied to ground to improve thermal dissipation or left disconnected. 3, EXP GND Power supply ground. Exposed pad EXP must be tied with GND pin 3. 4 N/C No connection. This pin can be tied to ground to improve thermal dissipation or left disconnected. 5 N/C No connection. This pin can be tied to ground to improve thermal dissipation or left disconnected. 1 IN Input pin. A small capacitor is needed from this pin to ground to assure stability. Table 2. ABSOLUTE MAXIMUM RATINGS Rating Symbol Value Unit Input Voltage (Note 1) V 0.3 to 24 V IN Output Voltage V 0.3 to 6 V OUT Output Short Circuit Duration t Indefinite s SC Maximum Junction Temperature T 150 C J(MAX) Operating Ambient Temperature Range T 40 to 125 C A Storage Temperature Range T 55 to 150 C STG ESD Capability, Human Body Model (Note 2) ESD 2000 V HBM ESD Capability, Machine Model (Note 2) ESD 200 V MM Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Refer to ELECTRICAL CHARACTERISTICS and APPLICATION INFORMATION for Safe Operating Area. 2. This device series incorporates ESD protection and is tested by the following methods: ESD Human Body Model tested per EIA/JESD22A114 ESD Machine Model tested per EIA/JESD22 A115 Latch up Current Maximum Rating tested per JEDEC standard: JESD78. Table 3. THERMAL CHARACTERISTICS Rating Symbol Value Unit Thermal Characteristics, wDFN6, 2 mm x 2 mm R 120 C/W JA Thermal Resistance, JunctiontoAir Table 4. RECOMMENDED OPERATING CONDITIONS Parameter Symbol Min Max Unit Input Voltage V 2.5 24 V IN Junction Temperature T 40 125 C J Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. www.onsemi.com 2