NLAS7213 High-Speed USB 2.0 (480 Mbps) DPST Switch The NLAS7213 is a DPST switch optimized for highspeed USB 2.0 applications within portable systems. It features ultralow off capacitance, C = 3.0 pF (typ), and a bandwidth above 1118 MHz. It OFF www.onsemi.com is optimized for applications that use a single USB interface connector to route multiple signal types. The C and R of both switches are ON ON suitably low to allow the NLAS7213 to pass any speed USB data or MARKING audio signals going to a moderately resistive terminal such as an DIAGRAM external headset. The NLAS7213 is protected on all pins with 8 kV 1 UQFN8 Human Body Model ESD protection. It is offered in a 1.5 x 1.5 mm AA M (1.5 x 1.5 mm) UQFN8 package. 8 CASE 523AH 1 Features AA = Specific Device Code R : 8.5 Max V = 3.3 V ON CC M = Date Code C : 3.0 pF Typ V = 3.3 V = PbFree Package OFF CC (Note: Microdot may be in either location) V Operating Range: 1.65 V to 4.5 V CC > 1118 MHz Bandwidth OVT up to 5.25 V on D+/D Pins ORDERING INFORMATION See detailed ordering and shipping information in the package 1.5 x 1.5 x 0.55 mm UQFN8 dimensions section on page 8 of this data sheet. 8 kV ESD Protection on All Pins This is a PbFree Device Typical Applications High Speed USB 2.0 Data Mobile Phones Portable Devices NLAS7213 FS USB XCVR or AUDIO AMP HS USB XCVR Figure 1. Application Diagram Semiconductor Components Industries, LLC, 2014 1 Publication Order Number: November, 2014 Rev. 5 NLAS7213/D USB CONNECTORNLAS7213 NC HSD D Table 1. PIN DESCRIPTION Pin Function 7 6 5 OE Control Input Select Line HSD+, HSD, D+, D Data Ports Table 2. TRUTH TABLE VCC84 GND OE Both Switches 1 OPEN 0 CLOSED 3 1 2 OE HSD+ D+ Figure 2. Pin Connections and Logic Diagram (Top View) MAXIMUM RATINGS Symbol Pins Parameter Value Unit V V Positive DC Supply Voltage 0.5 to +4.6 V CC CC V HSD+, HSD Analog Signal Voltage 0.5 to V + 0.3 V IS CC D+, D 0.5 to +5.25 V OE Control Input Voltage 0.5 to +4.6 V IN I V Positive DC Supply Current 50 mA CC CC T Storage Temperature 65 to +150 C S I HSD+, HSD, Analog Signal Continuous CurrentClosed Switch 300 mA IS CON D+, D I HSD+, HSD, Analog Signal Continuous Current 10% Duty Cycle 500 mA IS PK D+, D I OE Control Input Current 20 mA IN Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. RECOMMENDED OPERATING CONDITIONS Symbol Pins Parameter Min Max Unit V Positive DC Supply Voltage 1.65 4.5 V CC V HSD+, HSD Analog Signal Voltage GND V V IS CC D+, D GND 4.5 V OE Digital Select Input Voltage GND V V IN CC T Operating Temperature Range 40 +85 C A Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. ESD PROTECTION Symbol Parameter Value Unit ESD Human Body Model All Pins 8.0 kV www.onsemi.com 2 CONTROL