NOIP1SN1300A PYTHON 1.3/0.5/0.3 MegaPixels Global Shutter CMOS Image Sensors FEATURES Size Options: www.onsemi.com PYTHON 300: 640 x 480 Active Pixels, 1/4 Optical Format PYTHON 500: 800 x 600 Active Pixels, 1/3.6 Optical Format PYTHON 1300: 1280 x 1024 Active Pixels, 1/2 Optical Format Data Output Options: P1SN/SE/FN: 4 LVDS Data Channels P2SN/SE: 10 bit Parallel P3SN/SE/FN: 2 LVDS Data Channels 4.8 m x 4.8 m Low Noise Global Shutter Pixels with In-pixel CDS Monochrome (SN), Color (SE) and NIR (FN) Zero Row Overhead Time (ZROT) Mode Enabling Higher Frame Rate Frame Rate at Full Resolution, 4 LVDS Data Channels (P1SN/SE/FN only) Figure 1. PYTHON 1300 210/165 frames per second SXGA (ZROT/NROT) 545/385 frames per second SVGA (ZROT/NROT) DESCRIPTION 815/545 frames per second VGA (ZROT/NROT) The PYTHON 300, PYTHON 500, and PYTHON 1300 Frames Rate at Full Resolution (CMOS) image sensors utilize high sensitivity 4.8 m x 4.8 m pixels 50/43 Frames per Second SXGA (ZROT/NROT) that support low noise pipelined and triggered global Onchip 10bit AnalogtoDigital Converter (ADC) shutter readout modes. The sensors support correlated Four/Two/One LVDS High Speed Serial Outputs or double sampling (CDS) readout, reducing noise and Parallel CMOS Output increasing dynamic range. Random Programmable Region of Interest (ROI) The image sensors have onchip programmable gain Readout amplifiers and 10bit A/D converters. The integration time Serial Peripheral Interface (SPI) and gain parameters can be reconfigured without any visible Automatic Exposure Control (AEC) image artifact. Optionally the onchip automatic exposure Phase Locked Loop (PLL) control loop (AEC) controls these parameters dynamically. The images black level is either calibrated automatically or High Dynamic Range (HDR) Modes Possible can be adjusted by adding a user programmable offset. Dual Power Supply (3.3 V and 1.8 V) A high level of programmability using a four wire serial 40C to +85C Operational Temperature Range peripheral interface enables the user to read out specific 48pin LCC regions of interest. Up to eight regions can be programmed, Power Dissipation: achieving even higher frame rates. 620 mW (P1, 4 LVDS, ZROT) The image data interface of the P1SN/SE/FN devices 420 mW (P1, P3, 2 LVDS, NROT) consists of four LVDS lanes, enabling frame rates up to 210 270 mW (P1, P3, 1 LVDS, NROT) frames per second in Zero ROT mode for the 420 mW (P2, ZROT) PYTHON 1300. Each channel runs at 720 Mbps. A separate These Devices are PbFree and are RoHS Compliant synchronization channel containing payload information is provided to facilitate the image reconstruction at the APPLICATIONS receiving end. The P2SN/SE devices provide a parallel Machine Vision CMOS output interface at reduced frame rate. The Motion Monitoring P3SN/SE/FN devices are the same as the P1SN/SE/FN Security but with only two of the four LVDS data channels enabled, facilitating frame rates of 90 frames per second in Normal Barcode Scanning (2D) ROT for the PYTHON 1300. Semiconductor Components Industries, LLC, 2016 1 Publication Order Number: April, 2018 Rev. 5 NOIP1SN1300A/DNOIP1SN1300A The devices are provided in a 48pin LCC package and are available in monochrome, Bayer color, and extended nearinfrared (NIR) configurations. ORDERING INFORMATION Part Number Description Package PYTHON 1300 NOIP1SN1300AQDI 1.3 Megapixel, Monochrome, LVDS Output NOIP1SE1300AQDI 1.3 Megapixel, Bayer Color, LVDS Output NOIP1FN1300AQDI 1.3 Megapixel, Monochrome with enhanced NIR, LVDS Output NOIP2SN1300AQDI 1.3 Megapixel, Monochrome, CMOS (parallel) Output NOIP2SE1300AQDI 1.3 Megapixel, Bayer Color, CMOS (parallel) Output NOIP1SN1300AQTI 1.3 Megapixel, Monochrome, LVDS Output, Protective Foil NOIP1SE1300AQTI 1.3 Megapixel, Bayer Color, LVDS Output, Protective Foil 48pin LCC NOIP1FN1300AQTI 1.3 Megapixel, Monochrome with enhanced NIR, LVDS Output, Protective Foil NOIP3SN1300AQDI 1.3 Megapixel, 2 LVDS Outputs, Monochrome NOIP3FN1300AQDI 1.3 Megapixel, 2 LVDS Outputs, NIR enhanced Monochrome NOIP3SE1300AQDI 1.3 Megapixel, 2 LVDS Outputs, Color NOIP3SN1300AQTI 1.3 Megapixel, 2 LVDS Outputs, Monochrome, Protective Foil NOIP3FN1300AQTI 1.3 Megapixel, 2 LVDS Outputs, NIR enhanced Monochrome, Protective Foil NOIP3SE1300AQTI 1.3 Megapixel, 2 LVDS Outputs, Color, Protective Foil PYTHON 500 NOIP1SN0500AQDI 0.5 Megapixel, Monochrome, LVDS Output NOIP1SE0500AQDI 0.5 Megapixel, Bayer Color, LVDS Output NOIP1FN0500AQDI 0.5 Megapixel, Monochrome with enhanced NIR, LVDS Output 48pin LCC NOIP1SN0500AQTI 0.5 Megapixel, Monochrome, LVDS Output, Protective Foil NOIP1SE0500AQTI 0.5 Megapixel, Bayer Color, LVDS Output, Protective Foil NOIP1FN0500AQTI 0.5 Megapixel, Monochrome with enhanced NIR, LVDS Output, Protective Foil PYTHON 300 NOIP1SN0300AQDI 0.3 Megapixel, Monochrome, LVDS Output NOIP1SE0300AQDI 0.3 Megapixel, Bayer Color, LVDS Output NOIP1FN0300AQDI 0.3 Megapixel, Monochrome with enhanced NIR, LVDS Output 48pin LCC NOIP1SN0300AQTI 0.3 Megapixel, Monochrome, LVDS Output, Protective Foil NOIP1SE0300AQTI 0.3 Megapixel, Bayer Color, LVDS Output, Protective Foil NOIP1FN0300AQTI 0.3 Megapixel, Monochrome with enhanced NIR, LVDS Output, Protective Foil The P1SN/SE/FN base part references the mono, color and NIR enhanced versions of the 4 LVDS interface the P2SN/SE base part references the mono and color versions of the CMOS interface the P3SN/SE/FN base part references the mono, color and NIR enhanced version of the 2 LVDS interface. More details on the part number coding can be found at