NOIV2SE1300A-QDC ON Semiconductor

NOIV1SN1300A, NOIV2SN1300A VITA 1300 1.3 Megapixel 150 FPS Global Shutter CMOS Image Sensor www.onsemi.com Features SXGA: 1280 x 1024 Active Pixels 4.8 m x 4.8 m Pixel Size 1/2 inch Optical Format Monochrome (SN) or Color (SE) 150 Frames per Second (fps) at Full Resolution (LVDS) 37 Frames per Second (fps) at Full Resolution (CMOS) On-chip 10-bit Analog-to-Digital Converter (ADC) 8-bit or 10-bit Output Mode Four LVDS Serial Outputs or Parallel CMOS Output Random Programmable Region of Interest (ROI) Readout Pipelined and Triggered Global Shutter, Rolling Shutter On-chip Fixed Pattern Noise (FPN) Correction Serial Peripheral Interface (SPI) Automatic Exposure Control (AEC) Phase Locked Loop (PLL) Figure 1. VITA 1300 Photograph High Dynamic Range (HDR) Dual Power Supply (3.3 V and 1.8 V) Applications 40C to +85C Operational Temperature Range Machine Vision 48-pin LCC and Bare Die Motion Monitoring 475 mW Power Dissipation (LVDS) Security 290 mW Power Dissipation (CMOS) Barcode Scanning (2D) These Devices are PbFree and are RoHS Compliant Description The VITA 1300 is a 1/2 inch Super-eXtended Graphics Array (SXGA) CMOS image sensor with a pixel array of 1280 by 1024. The high sensitivity 4.8 m x 4.8 m pixels support pipelined and triggered global shutter readout modes and can also be operated in a low noise rolling shutter mode. In rolling shutter mode, the sensor supports correlated double sampling readout, reducing noise and increasing the dynamic range. The sensor has on-chip programmable gain amplifiers and 10-bit A/D converters. The integration time and gain parameters can be reconfigured without any visible image artifact. Optionally the on-chip automatic exposure control loop (AEC) controls these parameters dynamically. The images black level is either calibrated automatically or can be adjusted by adding a user programmable offset. A high level of programmability using a four wire serial peripheral interface enables the user to read out specific regions of interest. Up to 8 regions can be programmed, achieving even higher frame rates. The image data interface of the V1-SN/SE part consists of four LVDS lanes, facilitating frame rates up to 150 frames per second. Each channel runs at 620 Mbps. A separate synchronization channel containing payload information is provided to facilitate the image reconstruction at the receive end. The V2-SN/SE part provides a parallel CMOS output interface at reduced frame rate. The VITA 1300 is packaged in a 48-pin LCC package and is available in a monochrome and color version. Contact your local ON Semiconductor office for more information. Semiconductor Components Industries, LLC, 2014 1 Publication Order Number: December, 2016 Rev. 10 NOIV1SN1300A/DNOIV1SN1300A, NOIV2SN1300A ORDERING INFORMATION Part Number Mono/Color Package NOIV1SN1300A-QDC LVDS Interface mono 48pin LCC NOIV1SE1300A-QDC LVDS Interface color NOIV2SN1300A-QDC CMOS Interface mono NOIV2SE1300A-QDC CMOS Interface color NOIV1SN1300A-XXC Die sales, mono Die Sales The V1-SN/SE base part is used to reference the mono and part is used to reference the mono and color versions of the color versions of the LVDS interface the V2-SN/SE base CMOS interface. ORDERING CODE DEFINITION PACKAGE MARK Following is the mark on the bottom side of the package with Pin 1 to the left center Line 1: NOI xxxx 1300A where xxxx denotes LVDS (V1) / CMOS (V2), mono micro lens (SN) /color micro lens (SE) option Line 2: -QDC Line 3: AWLYYWW www.onsemi.com 2