Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductors system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductors product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. Typical parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.QED223 Plastic Infrared Light Emitting Diode
February 2016
QED223
Plastic Infrared Light Emitting Diode
Features Description
PACKAGE DIMENSIONS
= 880nm The QED223 is 880nm AlGaAs LEDs encapsulated
in a clear purple tinted, plastic T-1 3/4 package.
Chip material = AlGaAs
Package type: T-1 3/4 (5mm lens diameter)
Matched photosensor: QSD123/QSD124
Medium wide emission angle, 30
High output power
Package material and color: clear, purple tinted, plastic
Package Dimensions
0.195 (4.95)
REFERENCE
0.305 (7.75)
SURFACE
0.040 (1.02)
NOM
0.800 (20.3)
MIN
CATHODE
Schematic
0.050
0.100 (2.54)
(1.25)
NOM
ANODE
0.240 (6.10)
CATHODE
0.215 (5.45)
0.020 (0.51)
SQ. (2X)
Notes:
1. Dimensions of all drawings are in inches (mm).
2. Tolerance is 0.010 (0.25) on all non-nominal dimensions
unless otherwise specified.
2001 Fairchild Semiconductor Corporation www.fairchildsemi.com
QED223 Rev. 2.3