ROCKER SWITCHES K1/K2 SNAP-IN ROCKERS SEALED, ILLUMINATED ROCKER SWITCHES LOW COST, SNAP-IN ROCKER FOR WET & DUSTY ENVIRONMENTS The K series rockers are rugged, high performance sealed switches designed for use under severe conditions found in marine, appliance, heavy equipment and industrial control applications. Sealed to IP68S with an optional panel gasket available. The K1 series is offered in single pole configuration while the K2 series is available in single and double pole configurations. Both series offer illuminated models. Illumination can be independent or dependent of the switch position or a K1 Series combination of both. A choice of red, green, clear or amber Single Pole colored lenses are offered in illuminated models. Illumination options include incandescent, LED or neon light sources. Mounting is simple and quick snaps into panel from the front. The OTTO snap-in design supports a variety of panel thicknesses with just one cutout size specified. A choice of models are offered to handle power levels to 16 amps, 1/2 HP and low level electronic switching applications. OTTO can provide custom colors upon request. Value-added assemblies with wire leads are also available. Please consult the factory for assistance. K2 Series Single & Double Pole CUS Features: Standard Characteristics/Ratings: Withstands direct water spray Watertight to IP68S ELECTRICAL RATINGS: Load Sea Level 28VDC Cycles Fits industry standard panel openings for drop-in or 125/250VAC, 60Hz replacement of panel sealed & unsealed switches Resistive 16A 25,000 Snap-in feature accommodates a wide range of Resistive 10A 50,000 panel cutouts Inductive 10A 25,000 Lamp 5A 25,000 Switches up to 16 amps Motor 0.5HP 25,000 UV & solvent resistant DWV 1050Vrms except across light terminals Withstands extreme shock & vibration Low Level 10mA 30mV Custom legends available Electrical Life: See Rating Chart 2 & 3-position, momentary & maintained action LIGHTING: Incandescent, LED & neon illumination with Light Source Rating independent & dependent light source options Incandescent (VDC) 6V, 12V, 24V Neon (VAC) 125V, 250V UL recognized & CSA certified LED (VDC) 2V, 6V, 12V, 24V Ignition protected Mechanical Life: 100,000 cycles RoHS/WEEE/Reach compliant Seal: IP68S Operating Temp Range: -30C to +85C MATERIALS: Case: Thermoplastic Button: Thermoplastic Base: Thermoplastic Terminals/Contact: Brass, silver alloy with silver plate, gold flash for low level Terminal Hardware: Screws and lockwashers provided when applicable K1/K2 series recommended Quick Connect terminals: AMP 60253-2 for 12-16 AWG AMP 42100-2 for 14-18 AWG Mounting Hardware: None provided Specifications Subject To Change Without Notice www.ottoexcellence.com 147K2 SNAP-IN ROCKERS SEALED, ILLUMINATED ROCKER SWITCHES LOW COST, SNAP-IN ROCKER FOR WET & DUSTY ENVIRONMENTS, 1 & 2 POLES K2 PART NUMBER CODE Part Number Code Continued Below K2 X X X Switch Action/Circuit Terminal Style/ Actuator Color/Style Position Position Position Circuit Switch Rating A. Red Standard POSITION A B C A. Quick Connect/ B. Black Standard A. 1-C1 NONE OFF SPST Standard C. White Standard B. 1-C1 NONE 2-C1 SPDT B. Screw/Standard D. Red Standard Paddle C. (1-C1) NONE OFF SPST C. Solder/Standard E. Black Standard Paddle D. (1-C1) NONE 2-C1 SPDT F. White Standard Paddle D. Quick Connect/ E. (1-C1) OFF (2-C1) SPDT 2,4 C 1,3 Low Level G. Red Short Paddle Pinned F. 1-C1 OFF 2-C1 SPDT G. (1-C1) OFF 2-C1 SPDT E. Screw/Low Level H. Black Short Paddle Pinned POSITION H. 1-C1/3-C2 NONE OFF DPST F. Solder/Low Level J. White Short Paddle Pinned J. 1-C1/3-C2 NONE 2-C1/4-C2 DPDT K. Red Standard Paddle Pinned K. (1-C1)/(3-C2) NONE OFF DPST L. Black Standard Paddle Pinned L. (1-C1)/(3-C2) NONE 2-C1/4-C2 DPDT M. White Standard Paddle Pinned M. (1-C1)/(3-C2) OFF (2-C1)/(4-C2) DPDT N. Red Standard Pinned N. 1-C1/3-C2 OFF 2-C1/4-C2 DPDT 2,4 C 1,3 P. Black Standard Pinned P. (1-C1)/(3-C2) OFF 2-C1/4-C2 DPDT R. White Standard Pinned POSITION Q. 1-C1 NONE (2-C1) SPDT R. OFF NONE (2-C1) SPST NOTE: For custom colors, contact factory. S. 1-C1/3-C2 NONE (2-C1)/(4-C2) DPDT T. OFF NONE (2-C1)/(4-C2) DPST U. 1-C1 OFF (2-C1) SPDT V. 1-C1/3-C2 OFF (2-C1)/(4-C2) DPDT 2,4 C 1,3 NOTE: ( ) denotes momentary action. K2 PART NUMBER CODE - CONTINUED FROM ABOVE X X X X X Light Type Light/Circuit Location Legend & Orientation Lens Color A. No Light Position A Position C A. None A. No Light B. 6V Incandescent A. No Lens A. No Lens B. F. B. C. C. 12V Incandescent B. Red B. Red D. 24V Incandescent C. Green C. Green E. 125 VAC Neon D. Amber D. Amber Dependent Light Dependent Light ON in position A ON in position A E. D. F. 250 VAC Neon E. Clear E. Clear Wired to terms 1 & 7 Wired to terms 1 & 7 Dependent Light G. 2V Red LED ON in position C C. Wired to terms 2 & 8 H. 2V Green LED G. J. 2V Amber LED K. 6V Red LED Dependent Light ON in position C F. G. L. 6V Green LED Wired to terms 2 & 8 Dependent Light M. 6V Amber LED ON in position A D. Wired to terms 1 & 7 N. 12V Red LED Independent Light at position C J. H. P. 12V Green LED Wired to terms 8 & 7 Q. 12V Amber LED Independent Light H. at position A R. 24V Red LED Wired to terms 8 & 7 S. 24V Green LED E. T. 24V Amber LED Independent Light L. K. NOTES: ON in position A Wired to terms 7 & 8 No momentary switches with dependent lights. Dependent Light ON in position C Independent Light Neon lamps only to be coded with clear or amber lenses. at position C Wired to terms 2 & 8 LED lenses must be clear or same color as LED. Wired to terms 8 & 7 N. M. J. K2 connector P/N C801765. D = Dependent Light Recommended Quick Connect Terminals: I = Independent Light AMP 60253-2 for 12-16 AWG wire with 0.160 -0.210 insulation OD NOTES: AMP 42100-2 for 14-18 AWG wire with 0.100 -0.170 insulation OD Independent Light LED anode (+) terminal ON in position A No dependent light in OFF position. Wired to terms 7 & 3 number shown in bold. P. R. All legends printed on actuators without lens(es) will be white Independent Light Light on OFF side must be ON in position C except actuator codes C, F, J, M & R. Wired to terms 8 & 4 independent. All legends printed on lenses will be white except on clear Not available in DP Contact factory for multiple lens(es) will be black. light types in the same K2 panel plugs available as shown on page 167. switch. 150 OTTO Full Line Catalog Specifications Subject To Change Without Notice