RF 2 Form A Low on-resistance (AQW22N)
DIP8-pin type featuring
low on-resistance with
RF 2 Form A
200V/400V load voltage
Low on-resistance (AQW22N)
AQW22N
FEATURES TYPICAL APPLICATIONS
6.4
1. 2-channels (Form A) type with high Measuring instruments
9.78
.252
.385
response speed, low leakage current Scanner, IC checker, Board tester, etc.
3.90.2
.154.008
and low on-resistance.
2. Applicable for 2 Form A use as well
as two independent 1 Form A use
6.4
9.78
.252
3. Low capacitance between output
.385
3.60.2
Height includes
.142.008 terminals ensures high response
standoff
speed:
The capacitance between output
terminals is small; typ. 10 pF.
CAD DataCAD Data
This enables for a fast operation speed of
mm inch
typ. 0.2 ms.
4. High sensitivity and low on-
1 8
resistance:
Max. 0.07 A of load current can be
2 7
controlled with input current of 5 mA.
3 6
The on-resistance is less than our
4 5
conventional models.
5. Low-level off state leakage current
6. Controls low-level analog signals:
PhotoMOS relay features extremely low
closed-circuit offset voltages to enable
control of small analog signals without
distortion.
TYPES
Part No.
Output rating* Packing quantity
Through hole
Surface-mount terminal
terminal
Package
Tape and reel packing style
Load Load
Tube packing style Tube Tape and reel
Picked from the Picked from the
voltage current
1/2/3-pin side 4/5/6-pin side
1 tube contains:
200 V 50 mA AQW227N AQW227NA AQW227NAX AQW227NAZ
AC/DC 50 pcs.
DIP8-pin 1,000 pcs.
dual use 1 batch contains:
400 V 40 mA AQW224N AQW224NA AQW224NAX AQW224NAZ
500 pcs.
*Indicate the peak AC and DC values.
Note: The surface mount terminal indicator A and the packing style indicator X or Z are not marked on the relay.
RATING
1. Absolute maximum ratings (Ambient temperature: 25C 77 F)
Item Symbol AQW227N(A) AQW224N(A) Remarks
LED forward current IF 50 mA
LED reverse voltage VR 5 V
Input
Peak forward current IFP 1 A f = 100 Hz, Duty factor = 0.1%
Power dissipation Pin 75 mW
Load voltage (peak AC) VL 200 V 400 V
0.05 A 0.04 A Peak AC, DC
Continuous load current IL
(0.07 A) (0.05 A) ( ): in case of using only 1 channel
Output
A connection: 100 ms (1 shot),
Peak load current Ipeak 0.15 A 0.12 A
VL = DC
Power dissipation Pout 800 mW
Total power dissipation PT 850 mW
I/O isolation voltage Viso 1,500 V AC
Non-condensing at low
Operating Topr 40C to +85 C 40F to +185F
Temperature
temperatures
limits
Storage Tstg 40 C to +100C 40F to +212F
ds_x615_en_aqw22n: 010611J 1RF 2 Form A Low on-resistance (AQW22N)
2. Electrical characteristics (Ambient temperature: 25 C 77 F)
Item Symbol AQW227N(A) AQW224N(A) Remarks
Typical 0.9 mA
LED operate current IFon IL = Max.
Maximum 3.0 mA
Minimum 0.4 mA
Input LED turn off current IFoff IL = Max.
Typical 0.8 mA
Typical 1.25 V (1.14 V at IF = 5 mA)
LED dropout voltage VF IF = 50 mA
Maximum 1.5 V
IF = 5 mA
Typical 30 70
On resistance Ron IL = Max.
Maximum 50 100
Within 1 s on time
IF = 0
Typical 10 pF
Output
Output capacitance Cout VB = 0
Maximum 15 pF
f = 1 MHz
IF = 0
Off state leakage current Maximum ILeak 10 nA (1 nA or less)*
VL = Max.
Typical 0.2 ms
IF = 5 mA
Turn on time* Ton
IL = Max.
Maximum 0.5 ms
Typical 0.08 ms
IF = 5 mA
Turn off time* Toff
Transfer
IL = Max.
Maximum 0.2 ms
characteristics
Typical 0.8 pF
f = 1 MHz
I/O capacitance Ciso
VB = 0
Maximum 1.5 pF
Initial I/O isolation resistance Minimum Riso 1,000 M 500 V DC
* Available as custom orders (1 nA or less)
**Turn on/Turn off time
Input
90%
Output 10%
Ton Toff
RECOMMENDED OPERATING CONDITIONS
Please obey the following conditions to ensure proper relay operation and resetting.
Item Symbol Recommended value Unit
Input LED current IF 5mA
Dimensions
Schematic and Wiring Diagrams
Cautions for Use
These products are not designed for automotive use.
If you are considering to use these products for automotive applications, please contact your local Panasonic technical
representative.
Please refer to our information on PhotoMOS Relays for Automotive Applications.
2 ds_x615_en_aqw22n: 010611J