POWER PhotoMOS RELAYS PhotoMOS 1-channel (Form A) Type RELAYS FEATURES 1. High capacity PhotoMOS Relay in a 8. PC board layout is simplied compact and slim 4-pin SIL 3.5 0.2 9. No restriction on mounting direction .138 .008 21 0.2 2. Extremely low ON resistance 10. Varistor incorporated type is also .827 .008 12.5 0.2 3. Control low-level signal available. .492 .008 Power Photo MOS relays feature ex- tremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. TYPICAL APPLICATIONS 4. Low-level off state leakage current mm inch High-speed inspection machines 5. High I/O isolation voltage 2,500 V IC checker 6. Eliminates the need for a counter NC machine, Robots electromotive protection diode in the Ofce machines drive circuit on the input side Telecommunication 7. Eliminate the need for a power sup- Automotive ply to drive the power MOSFET Industrial control TYPES 1. AC/DC type Output rating Packing quantity Part No. Load voltage Load current Inner carton Outer carton 60 V 3.0 A AQZ202 100 V 2.0 A AQZ205 25 pcs. 500 pcs. 200 V 1.0 A AQZ207 400 V 0.5 A AQZ204 2. DC type Output rating Packing quantity Part No. Load voltage Load current Inner carton Outer carton 60 V 4.0 A AQZ102 100 V 2.6 A AQZ105 25 pcs. 500 pcs. 200 V 1.3 A AQZ107 400 V 0.7 A AQZ104 Notes: Load voltage and current of AC/DC type: Peak AC/DC. Load voltage and current of DC type: DC 607 AQZ10m , 20m RATING 1. AC/DC type 1) Absolute maximum ratings (Ambient temperature: 25 C 77 F) Item Symbol AQZ202 AQZ205 AQZ207 AQZ204 Remarks LED forward current IF 50 mA LED reverse voltage VR 3 V Input Peak forward current IFP 1 A f = 100 Hz, Duty factor = 0.1% Power dissipation Pin 75 mW Load voltage (Peak AC) VL 60 V 100 V 200 V 400 V Continuous load current IL 3.0 A 2.0 A 1.0 A 0.5 A Output Peak load current Ipeak 9.0 A 6.0 A 3.0 A 1.5 A 100 ms (1 shot), VL = DC Power dissipation Pout 1.6 W Total power dissipation PT 1.6 W I/O isolation voltage Viso 2,500 V AC Operating Topr 40 C to +85 C 40 F to +185 F Non-condensing at low temperatures Temperature limits Storage Tstg 40 C to +100 C 40 F to +212 F 2) Electrical characteristics (Ambient temperature: 25 C 77 F) Item Symbol AQZ202 AQZ205 AQZ207 AQZ204 Condition Typical 1.0 mA IL= 100 mA LED operate current IFon VL= 10 V Maximum 3.0 mA Minimum 0.4 mA IL= 100 mA Input LED turn off current IFoff VL= 10 V Typical 0.9 mA Typical 1.25 V (1.16 V at IF = 10 mA) LED dropout voltage VF IF = 50 mA Maximum 1.5 V IF = 10 mA Typical 0.11 W 0.23 W 0.7 W 2.1 W On resistance Ron IL =Max. Maximum 0.18 W 0.34 W 1.1 W 3.2 W Within 1 s on time Output IF = 0 Off state leakage current Maximum 10 m A VL = Max. IF = 10 mA Typical 2.46 ms 2.40 ms 1.12 ms 1.65 ms IL = 100 mA Maximum 5.0 ms VL = 10 V Turn on time* Ton IF = 5 mA Typical 5.64 ms 5.65 ms 2.57 ms 3.88 ms Switching IL = 100 mA speed Maximum 10.0 ms VL = 10 V IF = 5 mA or 10 mA Typical 0.22 ms 0.21 ms 0.10 ms 0.08 ms Turn off time* Toff IL = 100 mA Transfer Maximum 3.0 ms VL = 10 V characteristics Typical 0.8 pF f = 1 MHz I/O capacitance Ciso VB = 0 Maximum 1.5 pF Initial I/O isolation Minimum Riso 1,000 MW 500 V DC resistance IF = 10 mA Maximum operating Maximum 0.5 cps Duty factor = 50% speed IL = Max., VL = Max. Vibration resistance Minimum 10 to 55 Hz at double amplitude of 3 mm 2 hours for 3 axes 2 Shock resistance Minimum 4,900 m/s 500 G 1 ms 3 times for 3 axes Note: Recommendable LED forward current IF= 5 to 10 mA. *Turn on/off time Input 90% 10% Output Ton Toff 608