17.35 (51 contacts) AYF31 FPC CONNECTORS FPC CONNECTORS FOR FPC CONNECTION Y3FT (0.3 mm pitch) with FPC tabs (Former Name: YF31) FEATURES 1. Low-prole, space-saving design 3. Equipped with soldering terminals (pitch: 0.3mm) for higher mounting strength The 0.9mm height, 3.0mm depth 4. Easy-to-handle front lock structure contributes to the miniaturization and 5. Wiring patterns can be located thickness reduction of target products. underneath the connector. * The total depth including the lever is 3.2mm. 6. Ni barrier with high resistance to solder creep APPLICATIONS Compact mobile devices Cellular phones, Digital cameras and DVC, etc Unit: mm 2. Compatible with FPC with tabs, reliability is increased through secure connectibility Thanks to a design in which the FPC tab portion attaches to the protruding resin part, depth is reduced which makes the product more compact and makes it possible to position during insertion, prevent diagonal insertion, and hold temporarily. This results in secure FPC insertion. (Y3F is compatible with FPC without tabs.) FPC tabs to prevent diagonal insertion and ensure reliable holding Soldering terminals (Metal clips) Compliance with RoHS Directive resistant to twisting ORDERING INFORMATION AYF 3 1 1 5 31: FPC Connector 0.3 mm pitch (Front lock, ZIF type with FPC tabs) Number of contacts (2 digits) Contact direction 1: Bottom contact Surface treatment (Contact portion / Terminal portion) 5: Au plating/Au flash plating (Ni barrier) panasonic-electric-works.net/ac 3.0 0.9AYF31 PRODUCT TYPES Packing Height Number of contacts Part number Inner carton Outer carton 15 AYF311515 17 AYF311715 23 AYF312315 25 AYF312515 27 AYF312715 29 AYF312915 0.9 mm 31 AYF313115 5,000 pieces 10,000 pieces 33 AYF313315 35 AYF313515 39 AYF313915 41 AYF314115 45 AYF314515 51 AYF315115 Notes: 1. Order unit For mass production: in 1-inner carton (1-reel) units Samples for mounting check: in 50-connector units. Please contact our sales ofce. 2. Please contact are sales ofce for connectors having a number of contacts other than those listed above. SPECIFICATIONS 1. Characteristics Item Specications Conditions Rated current 0.2A/contact Rated voltage 50V AC/DC Insulation resistance Min. 1,000M (initial) Using 250V DC megger (applied for 1 min.) Electrical No short-circuiting or damage at a detection current of 1 mA characteristics Breakdown voltage 150V AC for 1 min. when the specied voltage is applied for one minute. Based on the contact resistance measurement method Contact resistance Max. 80m specied by JIS C 5402. Measurement of the maximum force applied until the FPC holding force Min. 0.23N/contacts contacts (initial) inserted compatible FPC is pulled out in the insertion axis direction while the connector lever is closed Mechanical Measuring the maximum force. characteristics Contact holding force Min. 0.2N/contacts As the contact is axially pull out. Soldering terminal holding Measuring the maximum force. Min. 0.2N/contacts force As the soldering terminal is axially pull out. Ambient temperature 55C to +85C No freezing at low temperatures. No dew condensation. 55C to +85C (product only) Storage temperature 40C to +50C (emboss packing) Sequence 0 5 cycles, 1. 55 C, 30 minutes 3 Thermal shock resistance insulation resistance min. 100M , 2. ~ , Max. 5 minutes (with FPC inserted) +3 contact resistance max. 80m 3. 85 C, 30 minutes 0 4. ~ , Max. 5 minutes 120 hours, Environmental Humidity resistance Bath temperature 402C, insulation resistance min. 100M , characteristics (with FPC inserted) humidity 90 to 95% R.H. contact resistance max. 80m 24 hours, Saltwater spray resistance Bath temperature 352C, insulation resistance min. 100M , (with FPC inserted) saltwater concentration 51% contact resistance max. 80m H2S resistance 48 hours, Bath temperature 402C, gas concentration 31 ppm, (with FPC inserted) contact resistance max. 80m humidity 75 to 80% R.H. Peak temperature: 260C or less Reow soldering Soldering heat resistance 300C within 5 sec. 350C within 3 sec. Soldering iron Lifetime Insertion and removal life 30 times Repeated insertion and removal: min. 10 sec./time characteristics Unit weight 51-contact type: 0.09 g 2. Material and surface treatment Part name Material Surface treatment Housing: LCP resin (UL94V-0) Molded portion Lever: LCP resin (UL94V-0) Contact portion Base: Ni plating, Surface: Au plating Contact Copper alloy Terminal portion Base: Ni plating, Surface: Au plating Soldering terminal portion Copper alloy Base: Ni plating, Surface: Au plating panasonic-electric-works.net/ac