PCT-TRS-6LMG TRS Universal Compression Connector, Torque Retaining, Continuous Ground, Series 6 60% through Quad-Shield GENERAL SPECIFICATIONS Bandwidth 5 MHz to 3 GHz Impedance 75 Ohms (Nominal) Return Loss Minimum -30 dB to 1 GHz Shielding Effectiveness > -100 dB to 300 MHz, > -90 dB to 1 GHz Insertion Loss 0.2 dB 1 GHz Operating Voltage 90 V (at 60 Hz continuous AC) Continuous ground feature maintains the ground path even in Loosened Condition a loosened state Operating Temperature -40 to +140 F (-40 to +60 C) Cable Range RG6 Cable 60% through Quad-Shield Acceptable Maximum Core Diameter 0.193 in (4.91 mm) (Dielectric + Tape) Acceptable Minimum Jacket Diameter 0.273 in 0.008 in (6.93 mm 0.20 mm) Acceptable Maximum Jacket Diameter 0.297 in 0.008 in (7.54 mm 0.20 mm) Cable Retention >60 lb. (27.21 kg.), Ambient Temperature Cable Insertion <15 lb. maximum insertion force, Ambient Temperature PHYSICAL CHARACTERISTICS Length Before Compression 1.09 in (27.8 mm) Mating Mechanism 7/16 Hex 3/8-32 UNEF Threading Construction Material Nickel Plated Brass TOOLING Compression Tools * PCT-AIO-CT, PCT-RH-CT-AS, PCT-TRS-CT, PCT-TRS-CT-AS PART NUMBER Compression Connector, Torque Retaining, Continuous Ground, PCT-TRS-6LMG Series 6 60% through Quad-Shield *This list is not all inclusive and only reflects the tooling options available by PCT International, Inc. 2012 PCT International, Inc. All rights reserved. www.pctinternational.com Specifications subject to change without notice. 2260 West Broadway Road Mesa, Arizona 85202-1898 USA Tel +1.480.813.0925 Fax +1.480.545.1080 info pctintl.com (continued) PCT-TRS-6LMG TRS Universal Compression Connector, Torque Retaining, Continuous Ground, Series 6 60% through Quad-Shield SPECIFICATIONS REQUIREMENT / PCT PARAMETER RESULT REFERENCED INTERNATIONAL SPECIFIED Cable Retention ANSI/SCTE 99 2004 > 50 lbs pull force PASS Chemical Resistance BLCR GR-1503-CORE 4.7 No cracking or swelling PASS Corrosion Resistance BLCR GR 1503-CORE 3.2.1 1,000 hours salt spray PASS Tightening Torque ANSI/SCTE 98 2004 Tightened to 60 in /lbs without damage PASS < 0.05 dB to 350 MHz, < 0.1 dB to 700 MHz, Insertion Loss ANSI/SCTE 73 2007 PASS < 0.2 dB to 1 GHz Installation Force ANSI/SCTE 73 2007 < 20 lbs maximum insertion PASS Loosening Torque BLCR GR-1503-CORE 4.2 30 in / lbs after temperature cycling PASS No dye penetration after 5 days of Moisture Migration ANSI/SCTE 60 2004 PASS temperature cycling Ozone Degradation BLCR GR-1503-CORE 4.1 70 hours exposure PASS Return Loss ANSI/SCTE 05 2008 > -30 dB to 1 GHz PASS Salt Fog ANSI/SCTE 143 2007 > -30 dB return loss to 1 GHz PASS ANSI/SCTE 48-1 2007 Shielding Effectiveness > -100 dB to 300 MHz, > -90 dB to 1 GHz PASS ANSI/SCTE 48-2 2008 Temperature Cycling with Humidity BLCR GR-1503 4.1 > 50 lbs pull force after temperature cycling PASS UV Degradation BLCR GR-1503-CORE 4.8 UV resistant after 7 days PASS Vibration BLCR GR-1503-CORE 4.6 > 32 in / lbs loosening torque after vibration PASS DC Contact Resistance Outer ANSI/SCTE 103 2004 < 5 milliohms PASS Conductor 2012 PCT International, Inc. All rights reserved. www.pctinternational.com Specifications subject to change without notice. 2260 West Broadway Road Mesa, Arizona 85202-1898 USA Tel +1.480.813.0925 Fax +1.480.545.1080 info pctintl.com