JC120-0002 Penny & Giles

INNOVATION IN MOTION JC 120 Single-axis Fingertip Joystick Creative solutions for position measurement and controlSlim profile Developed for applications where ergonomics and system integrity are paramount, the JC120 is a Conductive Simple to install minimum width, low profile joystick that provides smooth, precise fingertip control in one axis. The low Long operating life Plastic profile lever makes the JC120 less susceptible to Superior reliability unintentional operation and the minimal under panel Technology space makes it ideal for mounting in panels and Rapid despatch operator arm rests. The JC120 is sealed to IP66 to JOYSTICK CONTROLLERS enable it to operate in extreme environments. Innovative design Total reliability Designed for use with electronic controllers the joystick generates analogue and switched the JC120 joystick incorporates reference signals proportional to the distance and direction over which the handle is moved. The conductive plastic track output is configured to provide signals for fault detection circuits and a centre tap provides an technology which provides accurate voltage reference for the lever in its released position, or a zero point for a bipolar absolute position control and supply voltage. An electrically independent switch operates with separate contacts each side of facilitates a maintenance free the lever centre position. operating life in excess of five million cycles. Typical applications include remote control chest packs and the control of off-highway or material handling equipment. Features Benefits Width only 26.5mm Increased control density Ergonomic design Reduced operator fatigue Choice of low profile lever heights Unintentional operation reduced Long life Maintenance free operation Sealed to IP66 Operation in hostile environments NO MAINTENANCE Choice of output voltage ranges Maximum interface flexibility JOYSTICK CONTROLLERS SINGLE-AXIS Selection Guide Penny+Giles offers the widest choice of options to suit your application. JC 120 - JC 120 - JC 120 - Connector Short lever Long lever The JC 120 is The JC 120 supplied The JC 120 supplied supplied with a with the short lever with the long lever 7 pin latching presents the lowest provides increased connector for easy profile, ensuring less fingertip control, but Rapid Despatch installation. The susceptibility to still ensures a lower mating connector unintentional lever profile than the assembly is ordered operation. JC 100 model. separately. EMC Directive 89/336/EEC The products detailed in this document are supplied as components for installation into an electrical apparatus or system. They are outside the scope of the EEC directive and will not be CE marked. 2