Easy to use Display and keypad for parameter settings Bracket for mounting the glass panel for the protection of the light outlet surface of safety light grids and curtains ASC (Automatic Signal Control) Transparency recognition 30 s High Speed Mode Master module Slave module Fiber optic Glass fiber/plastic Time function Sensitivity adjustment Teach-In Light/dark switch Detection range depends on the fiber optic cable being used , half detection range at High Speed Mode Light source LED , 660 nm Light type modulated visible red light Operating display Power on: static illumination , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) Diagnostics display 7-segment display Function display LED yellow: static illumination switching state, flashes when falling short of the stability control Controls Button (Mode) for menu choice Button (Set) for Teach-In Button (Up/Down) for fine adjusting and parameterization Operating voltage 10 ... 30 V DC No-load supply current 30 mA Function input external Teach-In Signal output 1 push-pull output NPN/PNP , short-circuit proof Switching current max. 100 mA , resistive load Voltage drop 2 V DC at 100 mA 0.7 V at 10 mA Switching frequency High speed mode: 16 kHz , Standard mode: 3 kHz , High resolution: 250 Hz ~ 3 kHz (selection by Photoelectric Sensors the sensor), AutomatFiber optic cablesic: 250 Hz , Glass mode: 250 Hz Timer function ON-delay, OFF-delay, one shot, pulse extension adjustable 0 ... 999 ms in 1 ms increments Ambient temperature -10 ... 55 C (14 ... 131 F) Protection degree IP50 Connection 2 m fixed cable , 1 x 0.25 mm , PVC 2 m PVC cable, 4 x 0,14 mm Housing PC Standards EN 60947-5-2 Approvals CE, cULus Listed 57M3 (Only in association with UL Class 2 power supply Type 1 enclosure) Introduction to Fiber Optic Cables Photographs Fiber Optic Diffuse and Plastic Fibers Thru-Beam Mode In applications involving small targets or unfavorable conditions, fiber optic cables may be the sensible solution. Diffuse Glass fiber optic cables are constructed from tiny strands of glass that are bundled together inside an application-specific sheath. 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Plastic fiber optic cables are manufactured from a light conductive plastic monofilament material, which is protected by a PVC jacket1 .1 .1 .1 .1 .1 .1 .1 .3 .3 .2 .4 .5 .6 .6 .7 .8 .9 .3 When attached to the end of certain photoelectric sensors, they guide Thru-Beam the light through the cable and out at the sensing head. A separate fiber attached to the receiver returns the light. Pepperl+Fuchs offers both glass and plastic fiber optic cables. The diameter of the glass fiber optic cables is generally larger than plastic and provides a longer sensing range. Pepperl+Fuchs glass cables can withstand temperatures as Glass Fibers high as 900 F while the plastic cables are rated as high as 221 F. The plastic cables are typically used due to their small size and narrow beam diameter. This enables easy detection of small parts such as pins on an Diffuse IC chip. Plastic cables can be cut-to-length in the field therefore, the correct length doesnt have to be specified when ordering. Obtaining the maximum light intensity possible in each application is accomplished by customizing the plastic cables to the shortest possible length. This reduces the inherent light losses that occur inside the cable. Pepperl+Fuchs offers three standard types of sheaths: stainless steel, Thru-Beam silicone, and PVC. In diffuse mode sensing, a bifurcated cable (2 in 1) is used. Thru-beam requires two individual cables. Threaded Mounting Plastic Cylinder Fiber Optic Cable Mounting and Fitting 15 mm Fiber Sensor When positioning plastic fiber optic cable, a minimum bending radius of 15 mm must be maintained. In addition, a 15 mm straight section of 15 mm must be maintained at both ends R of fiber optic cable between the threaded mounting cylinder R 15 mm and optical sensor. Some fiber optic cables have a flexible stainless Stainless Steel Threaded Mounting Plastic Pickup Head Cylinder Fiber Optic Cable steel pickup attached. In such a case, a minimum 15 mm Fiber Sensor 10 mm bending radius of 10 mm must be maintained. Also, to avoid damage to the pickup head light guide, a R straight section of 10 mm must be maintained at both R 15 mm ends. R 10 mm R 15 mm R 10 mm Please Note Do not twist or kink Avoid contact with Excessive pulling will lead to plastic fiber optic cables. petroleum or organic solvents. severe damage. Refer to General Notes Relating to Product Information Copyright Pepperl+Fuchs Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776-4411 Singapore: +65 6779 9091 550 www.pepperl-fuchs.com fa-info us.pepperl-fuchs.com fa-info de.pepperl-fuchs.com fa-info sg.pepperl-fuchs.com Photoelectric Sensors Photoelectric Sensors, Standard Sensors, Diffuse mode sensors with background suppression Photoelectric Sensors, Standard Sensors, Diffuse mode sensors with background suppression Photoelectric Sensors, Standard Sensors, Diffuse mode sensors Photoelectric Sensors, Standard Sensors, Diffuse mode sensors Photoelectric Sensors, Standard Sensors, Retroreflective sensors Photoelectric Sensors, Standard Sensors, Retroreflective sensors Photoelectric Sensors, Standard Sensors, Thru-beam sensors Photoelectric Sensors, Standard Sensors, Thru-beam sensors Photoelectric Sensors, Standard Sensors, Fiber optic sensors Photoelectric Sensors, Standard Sensors, Fiber optic sensors Photoelectric Sensors, Standard Sensors, Distance sensors Photoelectric Sensors, Standard Sensors, Contrast and luminescence sensors Photoelectric Sensors, Standard Sensors, Color sensors Photoelectric Sensors, Standard Sensors, Slot sensors Photoelectric Sensors, Standard Sensors, Slot sensors Photoelectric Sensors, Light Grids Photoelectric Sensors, Optical Data Couplers Photoelectric Sensors, Accessories Photoelectric Sensors, Standard Sensors, Fiber optic cables SU19/110/115/123 SU19.1/110/115Photoelectric Sensors Fiber optic cables Specifications for Glass Fiber Optic Cables (with Model Numbers L...) PVC Silicone Stainless Steel Sheathing Sheathing Sheathing Protection (IEC) IP67 IP40 IP67 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Bending Radius 30 mm 20 mm 25 mm Working Temperature Range -58 F to +248 F -58 F to +572 F -58 F to +356 F .1 .1 .1 .1 .1 .1 .1 .1 .3 .3 .2 .4 .5 .6 .6 .7 .8 .9 .3 Minimum Bend Radius for HPF and FE Cables To help prevent possible damage to fiber optic cables, do not exceed the minimum bend radius. Glass Stainless Steel Sheathing Cables 1 inch (25 mm) Glass PVC Sheathing Cables 0.75 inch (19 mm) Plastic Cables - 1 mm diameter core 1 inch (25 mm) Plastic Cables - 0.5 mm diameter core 0.5 inch (12.5 mm) Temperature Ranges for HPF and FE Cables Plastic Fiber Optic Sensor Head -22 F to +158 F (-30 C to +70 C) Plastic Cable -22 F to +158 F (-30 C to +70 C) Plastic Cable Lens Accessories -22 F to +158 F (-30 C to +70 C) Glass Cable (PVC Sheathing) -40 F to +250 F (-40 C to +120 C) Glass Cable (Stainless Steel Sheathing) -40 F to +450 F (-40 C to +232 C) Glass Cable (High Temperature) -40 F to +900 F (-40 C to +482 C) Glass Cable End Tips -40 F to +585 F (-40 C to +307 C) Glass Cable for SU18, SU19, SU17.1, and ML17-LL (Stainless Steel Sheathing) -67 F to +392 F (-55 C to +200 C) Glass Cable for SU18, SU19, SU17.1, and ML17-LL (PVC Sheathing) -67 F to +149 F (-55 C to +65 C) Note: SU19 Series sensing ranges are reduced by 50% in high-speed or glass modes. Refer to General Notes Relating to Product Information Copyright Pepperl+Fuchs Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776-4411 Singapore: +65 6779 9091 551 www.pepperl-fuchs.com fa-info us.pepperl-fuchs.com fa-info de.pepperl-fuchs.com fa-info sg.pepperl-fuchs.com Photoelectric Sensors Photoelectric Sensors, Standard Sensors, Diffuse mode sensors with background suppression Photoelectric Sensors, Standard Sensors, Diffuse mode sensors with background suppression Photoelectric Sensors, Standard Sensors, Diffuse mode sensors Photoelectric Sensors, Standard Sensors, Diffuse mode sensors Photoelectric Sensors, Standard Sensors, Retroreflective sensors Photoelectric Sensors, Standard Sensors, Retroreflective sensors Photoelectric Sensors, Standard Sensors, Thru-beam sensors Photoelectric Sensors, Standard Sensors, Thru-beam sensors Photoelectric Sensors, Standard Sensors, Fiber optic sensors Photoelectric Sensors, Standard Sensors, Fiber optic sensors Photoelectric Sensors, Standard Sensors, Distance sensors Photoelectric Sensors, Standard Sensors, Contrast and luminescence sensors Photoelectric Sensors, Standard Sensors, Color sensors Photoelectric Sensors, Standard Sensors, Slot sensors Photoelectric Sensors, Standard Sensors, Slot sensors Photoelectric Sensors, Light Grids Photoelectric Sensors, Optical Data Couplers Photoelectric Sensors, Accessories Photoelectric Sensors, Standard Sensors, Fiber optic cables