PDA041W-700B-R Phihong

WWW.PHIHONG.COM 40W Dimmable Constant Current LED Driver PDA041W Waterproof LED Driver with 0-10V Dimming Features Class 2 per UL1310 IP67 Rating - waterproof OVP, OCP, Over-Load and Short-Circuit THD <20% Protection UL 8750 Compliant >0.9 Power Factor Correction 0-10V and Resistive Dimming 5 Year Warranty Brownout/Brownout Recovery Applications Down lights Architectural lighting Area Lights Safety Approvals cUL/UL Mechanical Characteristics Length: 95mm (3.74in) Height: 32mm (1.26in) Width: 71mm (2.79in) Weight: N/A Output Specifications DC Output Voltage Output Output Model Current Min. Typ. Max. Power PDA041W-700B 39V - 54V 700mA 38W PDA041W-1A0B 28V - 38V 1050mA 40W PDA041W-1A4B 18V - 26V 1400mA 37W Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 7/24/2014 PDA041W Specifications WWW.PHIHONG.COM INPUT: EMC FCC 47 Part 18 Class B AC Input Voltage Rating 120VAC to 277VAC Immunity IEC61000-4-2 AC Input Frequency IEC61000-4-4 47~63Hz IEC61000-4-5 IEC61000-4-11 Maximum Input Current 0.8A Dielectric Withstand (Hi-pot) Test Primary to secondary: 3000VAC for 1 minute, 10mA Leakage Current 0.5mA maximum Insulation Resistance Primary to secondary: >10M Ohm 500VDC, 1 Minute Power Factor 0.9 FEATURES: Short-Circuit Protection THD The PSU will withstand a short circuit across the Less than 20% outputs without damage OUTPUT: Input Over Current Protection Output Current Ripple The input power line will be fused with a 2A/300V fuse <40% Output Over-voltage Protection Efficiency Auto shutdown Model Typical Efficiency PDA41W-700B 89% Input / Output Connections PDA41W-1A0B 88.5% Position Terminal Color Specification PDA41W-1A4B 88% Black AWG16 Solid Wire Input White AWG16 Solid Wire Auxiliary Power Supply Red AWG18 Solid Wire Output 12V semi regulated (11-14Vdc) Blue AWG18 Solid Wire 0-10mA Dim+ Purple AWG20 Solid Wire Dim- Grey AWG20 Solid Wire Dimming Function: Auxiliary Yellow AWG20 Solid Wire Resistance or 0-10VDC dimming (See Characteristics below) Resistor must be placed between Dim+ and Dim- for operation. See following page for dimming table. Environmental: Temperature Operation* -40 to +62C Non-operation -40 to +80C Operating Humidity 20 to 95% *Output derates from 50C to 62C Warranty 5 Years