WWW.PHIHONG.COM 120 Watt Low Cost Open Frame Power Supply PSA120 Single Output Series Features 3 x 5 Footprint Low Cost Low Profile fits 1U Height Requirement Zero Minimum load Class B Conducted EMI Over Voltage and Short Circuit Protection Applications Low Profile Racks Computer Peripherals POS Terminals Routers Network Hubs Gaming Machines Safety Approvals cUL/UL TUV CE (Low Voltage Directive) Mechanical Characteristics Length: 127mm (5in) Height: 31.5mm (1.24in) Width: 76.2mm (3in) Weight: 386.7g (13.6oz) Output Specifications (2) Load Ripple Regulation DC Output Max Model (3) (1) Voltage Power Min. Max. P-P (max.) Line Load PSA120-050 +5V 0A 15A 100mV 1% 4% 75W PSA120-120 +12V 0A 10A 120mV 1% 2% 120W PSA120-240 +24V 0A 5A 240mV 1% 2% 120W (1) 30CFM forced air required. With convection cooling load is 9A for 5V, 6.67A for 12V, and 3.33A for 24V models. (2) Measure by using a 12 inch twisted pair terminal with a 10uF capacitor and 0.1uF ceramic capacitor in parallel. (3) 30CFM forced air required. With convection cooling power is 45W for 5V, and 80W for 12V and 24V models. Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 7/14/2014 PSA120 Characteristics WWW.PHIHONG.COM Emissions Input: Conducted: FCC Class B AC Input Voltage Rating EN55022 Class B 100 to 240V AC Radiated: FCC Class A EN55022 Class A AC Input Voltage Range 90 to 264V AC Immunity EN55024 1998 AC Input Frequency EN61000-4-2 Level 3 47 to 63Hz EN61000-4-3 Level 2 EN61000-4-4 Level 3 Input Current EN61000-4-5 Level 3 4.0A (RMS) at maximum load and 115V AC EN61000-4-6 Level 2 2.0A (RMS) at maximum load and 230V AC EN61000-4-11 EN61000-3-2 Harmonic Class A Leakage Current EN61000-3-3 Flicker 3.5mA maximum at 264V AC General: Inrush Current Insulation Resistance 30A for 115V AC at maximum load Input to Ground: 10M ohms minimum, 500V DC 60A for 230V AC at maximum load (Cold start at ambient 25C) Dielectric Withstand (Hi-pot) Test Input to Output: 3000V AC for 1 minute, 10mA Hold-up Time Input to Ground: 1500V AC for 1 minute, 10mA 10mS minimum at maximum load and 115V AC Switching Frequency Output: 42KHz 10% Efficiency 70% minimum at max load and 115V AC for 5V MTBF (Full load, 30CFM and ambient 25C) 75% minimum at max load and 115V AC for 12V 150K hours minimum 78% minimum at max load and 115V AC for 24V AC Input Connector (Molex or Equivalent) Over-Voltage Protection Input Header: Molex 09-65-2038 or equivalent >120% Mating: Moles 09-50-1031 or equivalent Over-Current Protection DC Output Connector Over-current protection, auto-restart Output header: Molex 09-65-2088 or equivalent Mating: Molex 09-50-1081 or equivalent Short-Circuit Protection Output can be shorted permanently without damage Environmental: Temperature Operation 0 to 50C Non-operation -25 to +85C Humidity Operation 10 to 95% non-condensing