PSAA30R-150 Phihong

WWW.PHIHONG.COM 30W Interchangeable Plug Series PSAA30R Adapter Series Meets Level V Efficiency Requirements Features Limited Power Source Class II Double Insulated Level V Efficiency Compliance Class B EMI Applications Peripherals Point of Sale Equipment Gaming Machines Network Equipment Safety Approvals cUL/UL CE SAA C-Tick Mechanical Characteristics Length: 82.7mm (3.26in) Height: 39.1mm (1.54in) Width: 55mm (2.17in) Weight: 150g (5.29oz) Output Specifications Load Ripple Regulation Efficiency DC Output Model Voltage Min. Max. P-P (max.) Line Load Level PSAA30R-050 5V 0A 4.00A 70mV 5% PSAA30R-120 12V 0A 2.50A 120mV 5% PSAA30R-150 15V 0A 2.00A 200mV 5% PSAA30R-240 24V 0A 1.25A 240mV 5% PSAA30R-560 56V 0A 0.54A 560mV 5% (1) Measured with by-pass capacitors 0.1uF/10uF at output connector terminal and oscilloscope set at 20MHz. (2) At no load to full load, 1.5 meter (approx 5ft) DC cord, measured at the plug -- Interchangeable clips sold separately Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revision 4/30/2014 PSAA30R Characteristics WWW.PHIHONG.COM Input: Emissions FCC Class B AC Input Voltage Rating EN55022 Class B 100 to 240V AC Immunity AC Input Voltage Range IEC61000-4-2 Level 4 90 to 264V AC IEC61000-4-3 Level 2 IEC61000-4-4 Level 2 AC Input Frequency IEC61000-4-5 Level 2 47 to 63Hz IEC61000-4-6 Level 2 IEC61000-4-8 Level 1 Input Current IEC61000-4-11 0.8A (RMS) maximum at 120V AC EN61000-3-2 0.5A (RMS) maximum at 240V AC Over-Voltage Protection Leakage Current Auto restart 0.25mA maximum Over-Current Protection Inrush Current Auto-restart without damage <60A for 100V AC at maximum load <100A for 240V AC at maximum load Short-Circuit Protection (Cold start at ambient 25C) Output can be shorted without damage Input Power Saving Dielectric Withstand (Hi-pot) Test 0.3W maximum at no load Input to Output: 3000V AC for 1 min., 10mA Output: Insulation Resistance Efficiency Input to output: 7M ohm, 500V DC Meets Level V efficiency requirements DC Output Connector (Barrel Type) Environmental: 2.1 x 5.5 x 9.5mm Center Positive Standard Temperature Operation 0 to +40C AC Input Clips (sold separately) Non-operation -25 to +75C RPA: US RPI: India Humidity 20 to 90% RPB: Brazil RPK: UK Dimension Diagram Unit: mm (inch) RPC: China RPN: Argentina RPE: Europe RPS: Australia RPH: Korea RPX: IEC320 C8 Type text