PSAC60W-120 Phihong

WWW.PHIHONG.COM 60 Watt Universal 2-Wire Input Adapter Features Low Cost Non-vented/Spill-proof Case DOE Level VI Compliant No Load Power consumption 150mW max Class B EMI Low Profile Design Ecodesign ErP Directive 2009/125/EC Limited Power Source Compliant Applications Portable Equipment Networking Peripherals Gaming Machines Safety Approvals cUL/UL CE CB Mechanical Characteristics Length: 130mm (5.12in) Height: 32mm (1.30in) Width: 60mm (2.36in) Weight: 305g (10.76oz) Output Specifications (1) DC Output Load Ripple Regulation Model Voltage Min. Max. P-P (max.) Line & Load PSAC60W-120-R +12V 0A 5.0A 200mV 5% PSAC60W-180-R +18V 0A 3.33A 180mV 5% PSAC60W-240-R +24V 0A 2.5A 350mV 5% PSAC60W-480-R +48V 0A 1.25A 480mV 5% PSAC60W-560-R +56V 0A 1.08A 560mV 5% (1) Measured with a 10uF capacitor and a 0.1uF capacitor at output connector terminal and oscilloscope set at 20MHz. Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 12/10/2018 PSAC60W Characteristics WWW.PHIHONG.COM Input: Emissions AC Input Voltage Rating Complies with FCC Class B 100 to 240V AC Complies with EN55032 Class B AC Input Frequency Immunity 47 to 63Hz IEC61000-4-2 Level 4 IEC61000-4-5 Level 3 Input Current 1.5A at 120V AC Over-Voltage Protection Latch off Leakage Current 0.25mA maximum at 254V AC and 60Hz Over-Current Protection Auto-restart Inrush Current 90A maximum at 100V AC Short-Circuit Protection 150A maximum at 240V AC Output can be shorted permanently without damage Input Power Saving 150mW max Isolation Primary to Secondary: 500V DC Output: >7M OHM Output Power 60W Dielectric Withstand (Hi-pot) Test Primary to Secondary: 3000V AC for 1 min., Efficiency 10mA DOE Level VI DC Output Connector Environmental: 2.1mm x 5.5mm x 9.5mm Center Positive Temperature Barrel Operation 0 to +40C Non-operation -20 to +70C Humidity 5 to 90%